Search for dissertations about: "induction motor thesis"

Showing result 1 - 5 of 65 swedish dissertations containing the words induction motor thesis.

  1. 1. Investigation of Issues Related to Electrical Efficiency Improvements of Pump and Fan Drives in Buildings

    Author : Johan Åström; [2008]
    Keywords : TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; permanent magnet motor; efficiency measurement; frequency converter; HVAC load profiles and saving potential; loss model; Induction motor;

    Abstract : This thesis deals with issues related to efficiency of building related pump and fan drive systems. Different motor technologies are analyzed and a more detailed study oninverter fed Induction Machines (IM) is presented. READ MORE

  2. 2. Design and Evaluation of a Compact 15 kW PM Integral Motor

    University dissertation from Stockholm : Elektrotekniska system

    Author : Peter Thelin; KTH.; [2002]
    Keywords : integral motor; integrated motor drive; PM motor; PMSM; compact motor; filter coil; airgap flux density; axial leakage;

    Abstract : This thesis deals with the integral motor of tomorrow, and particularly with a variable speed, sensorless permanent magnet synchronous motor with an integrated converter. The rated power is 15 kW at 1500 r/min. The outer dimensions are approximately the same as for the equivalent standard induction motor.Control strategies for pumps and fans, i. READ MORE

  3. 3. Design, Modelling and Control of Electrical Machines - With Applications to Iron-powder Machines and Acoustic Noise

    University dissertation from Department of Industrial Electrical Engineering and Automation, Lund Institute of Technology

    Author : David Martinez; [2005]
    Keywords : TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; BEM; induction machine; noise prediction; vector control; acoustic noise; HEV; series magnetization; leakage reduction; thermal model; FEM; MEC; claw-poles; SMC; slip-ring-less machine; sound intensity measurements; vibration; Electrical engineering; Elektroteknik;

    Abstract : This thesis consists of two parts, the first dealing with the design of iron-powder synchronous machines, and the second with the analysis and prediction of the acoustic noise in electrical machines. In Part I, a 1.6 kW electrically magnetized claw-pole machine with magnetically conducting end-plates has been analyzed and a prototype tested. READ MORE

  4. 4. On Fault Detection, Diagnosis and Monitoring for Induction Motors

    University dissertation from Luleå tekniska universitet

    Author : Mohammed Obaid Mustafa; Luleå tekniska universitet.; [2015]
    Keywords : TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Model based fault detection and diagnosis; Model free fault detection; Set Membership Identification SMI ; Uncertainty Bounds Violation Method; Model based Support Vector Classification; Linear and Nonlinear Classification; Minimum Volume Ellipsoid method; Broken Rotor Bars; Faults of Induction Motors; Three phase induction motor; Information technology - Automatic control; Informationsteknik - Reglerteknik; Reglerteknik; Control Engineering;

    Abstract : In this thesis, multiple methods and different approaches have been established and evaluated successfully, in order to detect and diagnose the faults of induction motors (IMs). The aim of this thesis is to present novel fault detection and isolation methods for the case of induction machines that would have the merit to be implemented online and being characterized by specific novel capabilities, when compared with the existing techniques. READ MORE

  5. 5. Robust Control of an Induction Motor Drive

    University dissertation from Stockholm : KTH

    Author : Henrik Mosskull; KTH.; [2006]
    Keywords : TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TECHNOLOGY Information technology Automatic control; TEKNIKVETENSKAP Informationsteknik Reglerteknik;

    Abstract : This thesis considers robust control of an induction motor drive, consisting of an input filter, a voltage source inverter and one or several induction motors in parallel. The motor torque is here controlled by using the method Indirect Self Control (ISC), and power oscillations between the inverter and the input filter are damped by means of a stabilization controller in an outer feedback loop. READ MORE