Advanced search
Showing result 1 - 5 of 23 swedish dissertations matching the above criteria.
-
1. Studies of aerosol particle formation from various sources using ion and electron beam analytical techniques
Abstract : The thesis presents the results of studies of aerosol particle formation using ion and electron beam analytical techniques. The sources of aerosol particle formation studied are the following: 1. production of primary aerosol particles in the high Arctic region during summers 2. READ MORE
-
2. Turbulence modulation effects caused by small droplets using one-dimensional-turbulence
Abstract : This thesis presents a stochastic model to study turbulence modulation effects on gas phases caused by small droplets or more generally speaking particles to achieve a better understanding about the physics and with the aim to provide data for a subgrid-scale (SGS) model for Large-eddy-simulations. The one-dimensional-turbulence (ODT) model addresses one of the major issues for multiphase flow simulations, namely computational costs. READ MORE
-
3. Drop Break-up in High-Pressure Homogenisers
Abstract : The overall aim of this project was to investigate the drop break-up process in milk homogenisers. This was done by measurements and calculations of the flow fields in the gap region and by visualisation of drops being broken up. To make visualisation and measurements possible, two scale models of a homogeniser gap were developed. READ MORE
-
4. Turbulence-droplet interaction modelled by One-Dimensional-Turbulence
Abstract : A stochastic model to study droplet/particle influence on the gas phase using the One-Dimensional-Turbulence model (ODT) is evaluated. To address one of the major problems for multiphase flow simulations, namely computational costs, the dimension-reduced model is used with the goal of predicting certain classes of these flows more efficiently. READ MORE
-
5. Properties of Multifunctional Oxide Thin Films Despostied by Ink-jet Printing
Abstract : Ink-jet printing offers an ideal answer to the emerging trends and demands of depositing at ambient temperatures picoliter droplets of oxide solutions into functional thin films and device components with a high degree of pixel precision. It is a direct single-step mask-free patterning technique that enables multi-layer and 3D patterning. READ MORE