Search for dissertations about: "lasersvetsning"
Showing result 1 - 5 of 9 swedish dissertations containing the word lasersvetsning.
-
1. High speed imaging analysis of laser welding
Abstract : Laser welding is often considered a new and exotic manufacturing method even though it has been used in industrial applications for nearly fifty years. In the early years only a few special applications justified the high investment cost involved, but as the price of the laser sources has reduced, industrial interest in laser welding has increased. READ MORE
-
2. Novel beam shaping and computer vision methods for laser beam welding
Abstract : Laser beam welding has been widely applied in different industrial sectors due to its unique advantages. However, there are still challenges, such as beam positioning in T-joint welding, and gap bridging in butt joint welding,especially in the case of varying gap width along a joint. READ MORE
-
3. Phenomena in wire based multi-layer laser welding and hybrid deposition
Abstract : Several laser materials processing technologies using metal wire addition have been researched during the last decades. Especially in the field of joining, as well as in the field of Additive Manufacturing (AM), multiple major benefits have been reached, e.g. higher welding speeds and lower heat input. READ MORE
-
4. Analysis and Monitoring of Laser Welding and Surface Texturing
Abstract : This thesis can be conveniently divided into three sections as follows;Part I. Monitoring of laser welding In laser materials processing there has always been a need for suitable methods to supervise and monitor the processes on-line, to ensure correct production quality or to trigger alarms when failures are detected. READ MORE
-
5. Investigation of Melt Pool Thermo-hydrodynamic Behaviour inLaser Beam Welding ofTi-6Al-4V through Numerical Simulation
Abstract : Laser is an efficient and widely used heat source in metal processing suchas welding and additive manufacturing. It has some great advantages compared to the other conventional heat sources like electron beam and arc namely: ability of handling complicated joint geometries and producing large components. READ MORE