Search for dissertations about: "liquid phase sintering"
Showing result 6 - 10 of 41 swedish dissertations containing the words liquid phase sintering.
-
6. Optimizing liquid phase sintering of ferrous powder metallurgical materials
Abstract : The properties of powder metallurgical, PM, components are dependent on that the dilemma of full density and suitable microstructure is resolved. Whilst it is often possible to achieve full density, it may or may not coincide with a suitable microstructure. READ MORE
-
7. Spark Plasma Sintering of Si3N4-based Ceramics : Sintering mechanism-Tailoring microstructure-Evaluationg properties
Abstract : Spark Plasma Sintering (SPS) is a promising rapid consolidation technique that allows a better understanding and manipulating of sintering kinetics and therefore makes it possible to obtain Si3N4-based ceramics with tailored microstructures, consisting of grains with either equiaxed or elongated morphology. The presence of an extra liquid phase is necessary for forming tough interlocking microstructures in Yb/Y-stabilised α-sialon by HP. READ MORE
-
8. Phase-field modeling of surface-energy driven processes
Abstract : Surface energy plays a major role in many phenomena that are important in technological and industrial processes, for example in wetting, grain growth and sintering. In this thesis, such surface-energy driven processes are studied by means of the phase-field method. READ MORE
-
9. Computational Modeling of Liquid-Phase based on Homogenization
Abstract : Liquid-phase sintering is the process where a pre-compacted powder, "green body", is heated to the point where(a part of) the solid material melts, and the specimen shrinks while keeping (almost) net shape. In the case of hardmetal, the microstructure is defined by WC-Co-particles with large pores, whereby molten Co represents the liquid phase. READ MORE
-
10. Surface Composition and Microstructure Control during Pressureless Forming and Sintering of Ferrous Powder Metallurgy Materials
Abstract : This study addresses key issues related to different stages of ferrous PM materials processing. Several analytical tools are applied in the study of surface composition and microstructure control in the processing of ferrous powder including forming, degassing and sintering stages. READ MORE