Search for dissertations about: "material testing"

Showing result 16 - 20 of 672 swedish dissertations containing the words material testing.

  2. 16. Weldability and Testing Methodology in Precipitation Hardening Superalloys

    Author : Jonny Jacobsson; []
    Keywords : TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Weldability; Alloy 718; ATI® 718Plus™ and Haynes® 282®; Superalloys; Varestraint; Waspaloy®;

    Abstract : Usable weldability data is desired in the manufacturing industry, especially within the aerospace industry where fabrication of structural jet engine components are realized. Welding of precipitation hardening superalloys such as Waspaloy®, Alloy 718, ATI® 718Plus™ and Haynes® 282® in particular can lead to solidification cracking in the fusion zone, liquation cracking in the heat affected zone and/or to solid state cracking. READ MORE

  4. 17. Method Development for Characterisation of Superalloy used in Containment Design

    Author : Ted Sjöberg; Mats Oldenburg; Jörgen Kajberg; Odd Geir Lademo; Luleå tekniska universitet; []
    Keywords : TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Hållfasthetslära; Solid Mechanics;

    Abstract : Due to the trend of increasing environmental demands put on civil aviation, manufacturersof commercial aircraft engines meet increased pressure to reduce weight. Modernturbofan engines represent up to almost one tenth of an aircraft's total weight, meaning areduction of engine component weight of just 30 kg is estimated to reduce CO2 emissionsby 400 tonnes over the lifetime of a medium sized commercial aircraft. READ MORE

  5. 18. The influence of microstructure on the crack initiation and propagation in Al-Si casting alloys

    Author : Toni Bogdanoff; Salem Seifeddine; Ehsan Ghassemali; Anders E.W. Jarfors; Johan Moverare; Jönköping University; []
    Keywords : TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Aluminum-Silicon alloys; scanning electron microscopy; material characterization; fatigue performance; digital image correlation;

    Abstract : For reducing the CO2 footprint in many industrial fields, the goal is to produce lighter components. The aluminium-silicon (Al-Si) cast alloys are promising candidates to fulfill these goals with a high weight-to-strength ratio, good corrosion properties, excellent castability, and recyclable material. READ MORE

  6. 19. Nonlinear Acoustics Applied to NonDestructive Testing

    Author : Kristian Haller; []
    Keywords : TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; nonlinear acoustics; nondestructive testing; activation density; slow dynamics; resonance frequency; nonlinear wave modulation spectroscopy; harmonic generation; trapped modes; open resonator; sweep rate;

    Abstract : Sensitive nonlinear acoustic methods are suitable for material characterization. This thesis describes three nonlinear acoustic methods that are proven useful for detection of defects like cracks and delaminations in solids. READ MORE

  7. 20. Investigation of Suffusion in Glacial Till Dam Cores : Testing methods and critical hydraulic gradients

    Author : Ingrid Silva; Jan Laue; Peter Viklander; Thomas Pabst; Luleå tekniska universitet; []
    Keywords : TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; internal erosion; suffusion; glacial till; dam cores; dams; experimental investigation; hydraulic gradient; testing methods; cohesionless soils; granular soils; Geoteknik; Soil Mechanics;

    Abstract : Suffusion is an internal erosion mechanism that occurs in embankment dams when fine grained particles in the dam core are washed out by seepage. Initiation of internal erosion depends mainly on three major factors: grain size distribution of the soil, stress conditions and hydraulic gradient; whilst its continuation depends on the properties of the filter. READ MORE