Search for dissertations about: "melt quality"

Showing result 1 - 5 of 42 swedish dissertations containing the words melt quality.

  1. 1. Conduction laser welding : modelling of melt pool with free surface deformation

    Author : Josefine Svenungsson; Högskolan Väst; []
    Keywords : ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Conduction laser welding; numerical modelling; Computational Fluid Dynamics; OpenFOAM; free surface deformation; melt pool; Production Technology; Produktionsteknik; Manufacturing and materials engineering; Produktions- och materialteknik;

    Abstract : Laser welding is commonly used in the automotive-, steel- and aerospace industry. It is a highly non-linear and coupled process where the weld geometry is strongly affected by the flow pattern in the melt pool. Experimental observations are challenging since the melt pool and melt flow below the surface are not yet accessible during welding. READ MORE

  2. 2. Electronic Waste Plastics Characterisation and Recycling by Melt-processing

    Author : Erik Stenvall; Chalmers University of Technology; []
    Keywords : TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; melt-blending; WEEE; ternary polymer blend; processing conditions; plastics recycling; composition analysis; e-waste;

    Abstract : Melt-processing of blended plastics from waste electrical and electronic equipment (WEEE) is a method to facilitate mechanical recycling, and this might improve the recycling conditions and increase the amounts of plastics being recycled. To ensure the quality of melt-blended plastic waste, it is essential to know the composition of the incoming material and then possibly improve the compatibility between the different polymer phases. READ MORE

  3. 3. High performing cast aluminium-silicon alloys

    Author : Martin Riestra; Salem Seifeddine; Ehsan Ghassemali; Jessica Elfsberg; Högskolan i Jönköping; []
    Keywords : ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Aluminium cast alloys; melt quality; eutectic modification; grain refinement; microstructure; tensile properties;

    Abstract : The need to produce lighter components due to environmental aspects and the development of electrical vehicles represents an opportunity for cast aluminium-silicon alloys. With high specific strength, good castability, high corrosion resistance and recyclability, these alloys offer an attractive combination of properties as an alternative to steel, cast iron and titanium-based components in certain applications. READ MORE

  4. 4. Imperfections in Recycled Aluminium-Silicon Cast Alloys

    Author : Anton Bjurenstedt; Anders Jarfors; Salem Seifeddine; Pål Schmidt; Högskolan i Jönköping; []
    Keywords : ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Imperfections; Recycled cast Al-Si alloy; Fe-rich particles; Melt quality; Fractography; Differential scanning calorimetry.;

    Abstract : In striving to produce high quality cast components from recycled aluminium alloys,imperfections have to be considered, because recycled aluminium usually containsmore of it. However, there are great energy savings to be made by using recycledaluminium; as little as 5% of the energy needed for primary aluminium productionmay be required. READ MORE

  5. 5. Snow quality in urban areas

    Author : Maria Viklander; Luleå tekniska universitet; []
    Keywords : ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; VA-teknik; Urban Water Engineering;

    Abstract : The studies reported on this thesis aim to provide information and increase knowledge about the quality of urban snow and the path of pollutants. The results develop a basis for decisions regarding the prevention of environmental damage. READ MORE