Search for dissertations about: "modal damping"
Showing result 21 - 25 of 54 swedish dissertations containing the words modal damping.
-
21. Dynamic Soil-Structure Interaction Analysis of High-Speed Railway Bridges : Efficient modeling techniques and Experimental testing
Abstract : The work reported in this thesis presents a general overview of the resonant response of high-speed railway bridges considering soil-structure interaction. The study aims to identify the effect of the surrounding and underlying soil on the global stiffness and damping of the structural system. READ MORE
-
22. Study of a Large Deformable Mirror Concept
Abstract : It is attractive to integrate a large deformable mirror for adaptive optics into an astronomical telescope rather than using relay optics within an auxiliary instrument. However, the resulting large deformable mirror can be expensive, particularly for extremely large telescopes. READ MORE
-
23. Dynamic Soil-Structure Interaction Analysis of Railway Bridges : Numerical and Experimental Results
Abstract : The work reported in this thesis presents a general overview of the dynamic response of short-span railway bridges considering soil-structure interaction. The study aims to identify the effect of the surrounding and underlying soil on the global stiffness and damping of the structural system. READ MORE
-
24. Some aspects of the dynamic soil-structure interaction of a portal frame bridge
Abstract : For certain bridge types, the influence of soil-structure interaction (SSI) may have an important contribution to the stiffness and damping of the structural system. From a design point of view, this influence may be both conservative and non-conservative and therefore, an increased knowledge within this field could lead to better design assumptions. READ MORE
-
25. Theoretical and experimental study of tooling systems : passive control of machining vibration
Abstract : Vibration control has been and still remains a subject of primary importance in modern manufacturing industry. To be able to remove high volumes of material in shorter time as well as to be able to get the right quality of the parts at the first time are goals that many shops would like to achieve. READ MORE