Search for dissertations about: "modeling in continuous casting"

Showing result 1 - 5 of 11 swedish dissertations containing the words modeling in continuous casting.

  1. 1. Heat transfer phenomena and mould flux lubrication in continuous casting of steel

    University dissertation from Stockholm : Materialvetenskap

    Author : Akira Yamauchi; KTH.; [2001]
    Keywords : Heat Transfer; Thermal Conductivity; Contact Resistance; Mould Flux; Solidification; Lubrication; Infiltration; Friction; Shear Stress; Modeling; Crystallization; Rupture Strength; Solidus; High-Speed Casting; Viscosity; Elasticity; Uniform Cooling;

    Abstract : Overall thermal resistance of the mould flux was measured tomake clear the influence of the mould flux properties on theheat transfer behavior in continuous casting, especiallythermal conductivity and the formation of air gaps in thisstudy. From the investigation of the effect of the mouldsurface temperature and physical properties of the mould fluxon heat transfer through the flux film, following knowledge hasbeen obtained. READ MORE

  2. 2. Modeling of magnetohydrodynamic turbulence

    University dissertation from Stockholm : Mekanik

    Author : Ola Widlund; KTH.; [2000]
    Keywords : turbulence model; magnetohydrodynamic; mhd; magnetohydrodynamic turbulence; computational fluid dynamics; continuous casting;

    Abstract : Conventional one-point turbulence closures have beenextended with an additional transported scalar for modeling ofmagnetohydrodynamic (MHD) turbulence. The new scalar, α ,captures the length scale anisotropy and tendency towardstwo-dimensionality, which is characteristic feature of MHDturbulence, and allows accurate modeling of the Jouledissipation of turbulence. READ MORE

  3. 3. Densities and viscosities of slags modeling and experimental investigations

    University dissertation from Stockholm : KTH

    Author : Mikael Persson; KTH.; [2006]
    Keywords : TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; density; nolar volume; thermodynamics; enthalpies; model; slags; oxide melts; viscosity; mould flux; continuous casting; TECHNOLOGY Chemical engineering Metallurgical process and manufacturing engineering Metallurgical process engineering; TEKNIKVETENSKAP Kemiteknik Metallurgisk process- och produktionsteknik Metallurgisk processteknik;

    Abstract : The present dissertation describes part of the efforts directed towards the development of computational tools to support process modeling. This work is also a further development of the Thermoslag software developed in the Division of Materials Process Science, KTH. READ MORE

  4. 4. Inclusion Behaviour under a Swirl Flow in a Continuous Casting Process

    University dissertation from KTH Royal Institute of Technology

    Author : Yang Ying; KTH.; [2014]
    Keywords : TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; inclusion behaviour; swirl flow; rotating magnetic field; electromagnetic swirl flow generator; full type; half type; submerged entry no zzle; mold;

    Abstract : A swirl flow generated in a submerged entry nozzle (SEN) can effectively improve a flow pattern and heat transfer in a continuous casting process by using the methods of “swirl blade type” and “electromagnetic type”. In order to obtain a further in-depth understanding with respect to the effect of a swirl flow on a continuous casting process, the inclusion behaviour in a SEN and a mold was studied in the present work. READ MORE

  5. 5. On some positive effects of swirling flow for the continuous cast mould billets

    University dissertation from Stockholm : KTH

    Author : Shavkat Kholmatov; KTH.; [2007]
    Keywords : TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; swirling flow; round mould; divergent angle; aspect ratio; temperature distribution; velocity fluctuations; continuous casting of steel; mathematical modeling; CFD; TECHNOLOGY Chemical engineering Metallurgical process and manufacturing engineering Metallurgical process engineering; TEKNIKVETENSKAP Kemiteknik Metallurgisk process- och produktionsteknik Metallurgisk processteknik;

    Abstract : Continuous caster moulds are the last and most important stage in the steelmaking process, where inclusions can either be generated or removed. With increasing casting speed using conventional immersion nozzles critical problems, such as unstable bulk mould flow have been noticed. READ MORE