Search for dissertations about: "mould filling"
Showing result 1 - 5 of 27 swedish dissertations containing the words mould filling.
-
1. A Study of the Initial Mould Filling during Up-hill Ingot Casting
Abstract : The fluid flow in the mould during up-hill teeming is of great importance for the quality of the cast ingot and thereby the quality of the final steel products. At the early stage of the filling of an up-hill teeming mould, liquid steel flows with a high velocity from the runner into the mould. READ MORE
-
2. A Model System for Powder Injection Moulding – Physical Properties and Mould Filling Analysis
Abstract : ABSTRACTPowder injection moulding (PIM) is an important and accepted industrial technique for producing net-shaped components which combines the advantages of injection moulding and powder metallurgy. The properties of the feedstock, a mixture of powder and binder system (often based on a thermoplastic polymer), strongly influence the process. READ MORE
-
3. Factors Related to the Formation of Gas Porosity in Grey Cast Iron: Investigation of Core Gas Evolution and Gas Concentrations in Molten Iron
Abstract : Since gas porosity is a major casting problem, it is of greatest importance to increase the knowledge about the foundry process in order to minimise the presence of gas porosity and thereby improving the casting quality. Gas porosity is generally considered to originate from gases precipitated during solidification of iron and from entrained gas picked up by the metal during the mould filling. READ MORE
-
4. Processing Aspects for Improving Mechanical Properties in Aluminium Castings
Abstract : The relation between the process and mechanical properties in aluminium alloys for castings has been examined. The relation was hard to define since the spread in data was severe due to defects created in the casting process. To avoid such defects a gradient solidification equipment was built. READ MORE
-
5. Manufacturing and Characterization of Filled Polymeric Systems
Abstract : The physical properties are changed if fillers are added to a polymeric material. In this work a highly filled model system for power injection moulding (PIM) and graphite nanoplatelet (GNP) based nanocomposites have been manufactured and characterized. READ MORE