Search for dissertations about: "mould flux"
Showing result 6 - 10 of 11 swedish dissertations containing the words mould flux.
-
6. Studies on Building Air Leakage -a transient pressurisation method, measurements and modelling
Abstract : Airtightness of the building envelope is a key factor for good performance of a building. The main part of this thesis deals with the exploration of a transient pressurisation method for air leakage measurements.In the transient method, an enclosure is pressurised to a desired pressure. The air flow into the enclosure is then stopped. READ MORE
-
7. A Study of the Initial Mould Filling during Up-hill Ingot Casting
Abstract : The fluid flow in the mould during up-hill teeming is of great importance for the quality of the cast ingot and thereby the quality of the final steel products. At the early stage of the filling of an up-hill teeming mould, liquid steel flows with a high velocity from the runner into the mould. READ MORE
-
8. Development and Implementation of a Mouldable Soft Magnetic Composite
Abstract : Electrical machines, chokes and induction heaters are found in most homes,offices and factories all over the world. They are used to create movement, filtrate the power or to generate heat. A typical unit consist of a coil and a flux conductor material. READ MORE
-
9. Investigations of Slag Properties and Reactions
Abstract : The present dissertation describes the efforts directed towards the development of computational tools to support process modeling. This work is also a further development of the Thermoslag® software developed in the Division of Materials Process Science, KTH. READ MORE
-
10. Experimental Studies of Thermal Diffusivities concerning some Industrially Important Systems
Abstract : The main objective of this industrially important work was to gain an increasing understanding of the properties of some industrially important materials such as CMSX-4 nickel base super alloy, 90Ti.6Al.4V alloy, 25Cr:6Ni stainless steel, 0. READ MORE