Search for dissertations about: "nuclear welding"
Showing result 1 - 5 of 10 swedish dissertations containing the words nuclear welding.
-
1. Friction stir welding of copper canisters for nuclear waste
Abstract : The Swedish model for final disposal of nuclear fuel waste is based on copper canisters as a corrosion barrier with an inner pressure holding insert of cast iron. One of the methods to seal the copper canister is to use the Friction Stir Welding (FSW), a method invented by The Welding Institute (TWI). READ MORE
-
2. The Prevalence of Radioactivity in a Number of Non-Nuclear Industries
Abstract : Four different non-nuclear industries have been investigated regarding the presence of radioactive elements, with the focus on natural radioactivity. The aim of the studies was to investigate the flow of radionuclides in the processes and/or to estimate doses to exposed workers. READ MORE
-
3. Investigation and modelling of friction stir welded copper canisters
Abstract : This work has been focused on characterisation of FSW joints, and modelling of the process, both analytically and numerically. The Swedish model for final deposit of nuclear fuel waste is based on copper canisters as a corrosion barrier with an inner pressure holding insert of cast iron. READ MORE
-
4. Friction Stir Welding of Copper Canisters Using Power and Temperature Control
Abstract : This thesis presents the development to reliably seal 50 mm thick copper canisters containing the Swedish nuclear waste using friction stir welding. To avoid defects and welding tool fractures, it is important to control the tool temperature within a process window of approximately 790 to 910°C. READ MORE
-
5. Mechanical Properties of Welds at Creep Activation Temperatures
Abstract : Welds in materials intended for service at temperatures above the creep activation temperature often develop damage before the base metal. The weld is a discontinuity in the material and stresses and strains often accumulate in the weld. Knowledge of the properties of the weld is essential to the safe operation of the component containing the weld. READ MORE