Search for dissertations about: "oxidation process"

Showing result 11 - 15 of 626 swedish dissertations containing the words oxidation process.

2. 11. Oxidation kinetics of nickel particles

   Author : Richard Karmhag; Uppsala universitet; []
   Keywords : TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Materials science; Oxidation; kinetics; nickel; particles; UFP; solar absorber; Materialvetenskap; Materials science; Teknisk materialvetenskap; Solid State Physics; fasta tillståndets fysik;

   Abstract : Nanoparticles have an immense surface to volume ratio. This is a key factor to the new properties of some materials made up of such particles. The oxide layer formed on all materials will have a large influence on the behaviour of these materials. The layer isadvantageous in some cases but causes problems in other. READ MORE

4. 12. Multiscale methods for the fundamental understanding of diesel soot mitigation

   Author : Carl Justin Kamp; Chalmers tekniska högskola; []
   Keywords : TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Nanofabrication; Catalyst; Soot; Aftertreatment; Carbon; Particulate Matter; Oxidation; Ash; Diesel Particulate Filter;

   Abstract : Current regulations for diesel exhaust emissions cannot be met by engine improvements alone, and for this reason the diesel particulate filter (DPF) is a widely used aftertreatment component for the control of diesel particulate matter (PM). The DPF functions by trapping PM and destroying it by oxidation. READ MORE

5. 13. Powder degradation during powder bed fusion processing

   Author : Ahmad Raza; Chalmers tekniska högskola; []
   Keywords : TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Laser-based powder bed fusion; Alloy 718; Powder degradation; Oxidation; Electron beam powder bed fusion; Additive manufacturing; AlSi10Mg; Residual oxygen; Spatter particles; Sublimation.;

   Abstract : Powder bed fusion (PBF) techniques, including laser-based powder bed fusion (LB-PBF) and electron beam powder bed fusion (EB-PBF), are two rapidly growing additive manufacturing (AM) processes due to their ability to produce complex geometries in near-net shapes. To attain reproducibility and repeatability in PBF processes, a consistent set of powder properties is vital. READ MORE

6. 14. Tailored process gases for laser powder bed fusion

   Author : Camille Nicole Géraldine Pauzon; Chalmers tekniska högskola; []
   Keywords : TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Helium; Laser powder bed fusion; AM process productivity; Spatter particles; Residual oxygen; 316L stainless steel; Argon; Nitrogen; Additive manufacturing; Process atmosphere; Process stability; Residual stresses.; Ti-6Al-4V; Alloy 718;

   Abstract : Metal laser powder bed fusion (L-PBF) allows for production of complex components using the energy from a laser to locally melt micron-sized powder following a layer-wise approach. Considerable scientific efforts are focused on addressing the influence of the process parameters on the melting stability and the control of material properties, while developing necessary monitoring and characterization tools. READ MORE

7. 15. Operando X-ray Absorption Spectroscopy Studies of Methane Oxidation Catalysts

   Author : Johan Nilsson; Chalmers tekniska högskola; []
   Keywords : TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; NATURVETENSKAP; NATURAL SCIENCES; operando spectroscopy; XAS; palladium; heterogeneous catalysis; methane oxidation; XAFS;

   Abstract : Operando spectroscopy is an experimental method in catalysis that combines measurements of catalytic activity and selectivity with simultaneous in situ spectroscopic characterization of the catalyst. Since the structure and composition of the catalyst are probed under reaction conditions, the method can provide valuable information to elucidate the mechanism of the studied reaction. READ MORE