Search for dissertations about: "particle sintering"

Showing result 1 - 5 of 55 swedish dissertations containing the words particle sintering.

2. 1. Liquid phase sintering of W-Ni-Fe composites : liquid penetration, agglomerate separation and tungsten particle growth

   Author : Anders Eliasson; Hasse Fredriksson; Thomas Gomez-Acebo; KTH; []
   Keywords : TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Liquid phase sintering; heavy metal; particle composites; tungsten; penetration; agglomerate separation; particle interaction; parabolic flight; sounding rockets; microgravity; Kirkendall effect; Metallurgical process engineering; Metallurgisk processteknik;

   Abstract : The initial stage of liquid phase sintering, involving liquid penetration, agglomerate separation, particle spreading and growth has been investigated in experiments using tungsten heavy alloys. The particle composites used were produced by hot isostatic pressing (HIP) of pure powder mixtures of W-Ni-Fe-(Co). READ MORE

4. 2. Novel approaches for achieving full density powder metallurgy steels

   Author : Maheswaran Vattur Sundaram; Chalmers tekniska högskola; []
   Keywords : TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Cr- and Mo-alloyed PM steels; vacuum sintering; high density; full density; hot isostatic pressing.; cold isostatic pressing; liquid phase sintering; master alloy; double pressing-double sintering; powder metallurgy steels; sintering; water atomised powder;

   Abstract : Powder metallurgy (PM) is one of the most resource-efficient methods for manufacturing structural components with complex shapes. The utilisation of the metal powder to shape the components allows to minimise material waste and increase energy efficiency. READ MORE

5. 3. Surface Characteristics of Water Atomized Pre-alloyed Steel Powders and their effect on Sintering

   Author : Dimitris Chasoglou; Chalmers tekniska högskola; []
   Keywords : TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; spinel oxides; sintering; Cr-pre-alloyed powder; reduction; sintering atmosphere; surface oxide; fractography; XPS; oxidation; AES; EDX; carbothermal reaction; SEM; Powder metallurgy;

   Abstract : Powder Metallurgy (PM) is an efficient method, in terms of cost and raw material utilization, for the production of structural parts that have strict dimensional tolerances and complex geometries. In the common processing route, steel powder is fabricated by water atomization and then pressed and sintered into the final component. READ MORE

6. 4. Surface Chemical Characteristics of Chromium-alloyed Steel Powder and the Role of Process Parameters during Sintering

   Author : Dimitris Chasoglou; Chalmers tekniska högskola; []
   Keywords : TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; carbothermal reaction; sintering atmosphere; depth profiling; XPS AES; HR SEM EDX; water atomized powder; surface coverage; reduction oxidation; PM steels; sintering; Cr-Mn-spinel oxides; surface oxides;

   Abstract : Powder Metallurgy (PM) is a cost efficient method suitable for sustainable production of structural parts that have strict dimensional tolerances and complex geometries. It has been a common practice to utilize Ni and Cu as alloying elements in PM steels, but the high and fluctuating prices of Ni and the concerns around it associated with health hazards as well as the difficulty in recycling Cu lead the PM industry to search for effective alternatives such as Cr and Mn. READ MORE

7. 5. Studies of catalyst sintering during operating conditions

   Author : Pooya Tabib Zadeh Adibi; Chalmers tekniska högskola; []
   Keywords : NATURVETENSKAP; NATURAL SCIENCES; nanoparticle sintering; operando spectroscopy; catalyst deactivation; indirect nanoplasmonic sensing; platinum; sintering kinetics;

   Abstract : The damaging effect of pollutants from exhaust gas of combustion engines on the human health and the environment is well recognized. Since the 70s, the three-way catalytic converter (TWC) has substantially improved the urban air quality by simultaneous conversion of CO, NOx and unburned hydrocarbons to O2 , N2 , CO2 and H2O. READ MORE