Search for dissertations about: "post weld heat treatment"

Showing result 1 - 5 of 14 swedish dissertations containing the words post weld heat treatment.

  2. 1. Weld Cracking in Precipitation Hardening Ni-based Superalloys

    Author : Fabian Hanning; Chalmers tekniska högskola; []
    Keywords : TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; welding; post weld heat treatment; weldability; Nickel based superalloys; strain age cracking; weld cracking;

    Abstract : Manufacturing of hot structural components for aero engines requires the materials being used to be weldable. The high demands on strength and temperature resistance make nickel based superalloys the material of choice for this application. READ MORE

  4. 2. Weld Cracking of Precipitation Hardening Ni-based Superalloys - Investigation of repair welding characteristics and susceptibility towards strain age cracking

    Author : Fabian Hanning; Chalmers tekniska högskola; []
    Keywords : TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Gleeble; Haynes 282; Waspaloy; welding; ATI 718Plus®; weldability; post-weld heat treatment; weld cracking; strain age cracking; hot cracking; Nickel-based superalloys;

    Abstract : High temperature resistance and strength requirements make nickel-based superalloys the material of choice for the hot section of aero engines. Fabrication in terms of combining wrought and cast parts in the manufacturing of hot structural components enables component optimisation via the use of wrought high-strength parts, where geometrical constraints allow, and cast parts to produce complex geometries. READ MORE

  5. 3. Simulation of welding and heat treatment : modelling and validation

    Author : Henrik Alberg; []
    Keywords : TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Datorstödd maskinkonstruktion; Computer Aided Design;

    Abstract : Many aerospace components with complex geometry are fabricated from smaller parts using joining techniques such as welding. Welding and the heat treatment which usually follows, can result in unwanted deformation and stresses. READ MORE

  6. 4. Validation of models for welding and post weld heat treatment in product development of aerospace components

    Author : Daniel Berglund; []
    Keywords : TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Datorstödd maskinkonstruktion; Computer Aided Design;

    Abstract : It is important to control key dimensions in aero engine components during manufacture. This is achieved by finding a stable process-parameter window for each manufacturing operation and to choose an order of manufacture, which gives an adequate result. Production planning has traditionally been carried out from experience and experiments. READ MORE

  7. 5. Fatigue life extension in existing steel bridges. High-Frequency Mechanical Impact treatment and Tungsten Inert Gas remelting in life extension and fatigue crack repair of welded steel structures

    Author : Hassan al-Karawi; Chalmers tekniska högskola; []
    Keywords : TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; HFMI; TIG-dressing; Life extension; Post weld treatment; Gain factor; Linear elastic fracture mechanics; Crack retrofiting; Peening; fatigue crack; Crack detection; Microhardness; Concentration factor; LEFM; TIG-remelting; Strain gauge;

    Abstract : This thesis investigates the performance of improved welds with two post-weld treatment methods for application on existing structures. High-Frequency Mechanical Impact (HFMI) treatment and Tungsten Inert Gas (TIG) remelting were used for fatigue life extension of welded structures. READ MORE