Search for dissertations about: "powder metallurgy steels"

Showing result 11 - 15 of 35 swedish dissertations containing the words powder metallurgy steels.

  2. 11. Development of Structural Steels for Powder Bed Fusion - Laser Beam

    Author : William Hearn; Chalmers tekniska högskola; []
    Keywords : TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; tensile properties; in situ tempering; process development; martensite; additive manufacturing; cold cracking; low-alloy steel; structural steel; powder bed fusion – laser beam; carbon steel;

    Abstract : Over the past decade, powder bed fusion – laser beam (PBF-LB) has attracted noticeable attention from both academia and industry. However, there remains a scarcity of approved material for the process, as fewer than 40 alloys are commercially available. READ MORE

  4. 12. Influence of Segregants on Creep Fracture in Powder Metallurgical Martensitic Stainless Steel

    Author : Mats Norell; Chalmers tekniska högskola; []
    Keywords : TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; AES; creep; segregants; powder metallurgy; prior particle boundaries; atomisation; SIMS; martensitic stainless steel; ESCA; cavities; powder surfaces;

    Abstract : This thesis deals with the behaviour of segregants in Powder Metallurgical (PM) 10%Cr steel and their impact on creep fracture. Particular interest is taken in determining the reaction products involved in creep cavitation and how these are connected to the powder surface reactions during the gas atomisation and consolidation (hot isostatic pressing). READ MORE

  5. 13. Mechanical Properties, Microstructures and Defects of Tool Steels Fabricated by Additive Manufacturing

    Author : Yuan Miwen; Chalmers tekniska högskola; []
    Keywords : TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Additive manufacturing; Carbides; Post heat treatment; Directed energy deposition; Softening resistance; Pores; Laser beam powder bed fusion; Solidification cracking; Tool steels;

    Abstract : Additive Manufacturing (AM) has been gaining significant interest in the manufacturing of metallic materials in the recent years. From a techno-commercial standpoint, tooling is one of the areas with low production volumes but very high demands on part performance and complexity in design, all of which are characteristic for metal AM. READ MORE

  6. 14. Nanopowder as sintering aid for water-atomized ferrous powder

    Author : Swathi Kiranmayee Manchili; Chalmers tekniska högskola; []
    Keywords : TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; master sintering curve; dilatometry; reduction kinetics; thermal analysis; compaction; nanopowder; surface oxide; hydrogen; sintering; water-atomized iron powder; water-atomized steel powder;

    Abstract : Press and sinter powder metallurgy steels are cost-effective solutions for structural applications. There is a constant drive for improvement in the density of these powder metallurgy steels to expand their usage in high-performance applications. READ MORE

  7. 15. Microstructure and Fatigue Analysis of PM-HIPed Alloys : A Focus on Inconel 625 and High-Nitrogen Tool Steel

    Author : Faezeh Javadzadeh Kalahroudi; Mikael Grehk; Mattias Calmunger; Karlstads universitet; []
    Keywords : TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; powder metallurgy; hot isostatic pressing; Inconel 625; high-nitrogen tool steel; microstructure; fatigue behavior; inclusions; Materialteknik; Materials Engineering;

    Abstract : Nickel-based superalloys and tool steels are well-known high-performance alloys due to their extensive use in many different industries. Nickel-based superalloys have found their way into aircraft, aerospace, marine, chemical, and petrochemical industries owing to their excellent high-temperature corrosion and oxidation resistance. READ MORE