Search for dissertations about: "properties of high strength steel"

Showing result 21 - 25 of 161 swedish dissertations containing the words properties of high strength steel.

  2. 21. Steel fibrous cement based composites: material and mechanical properties : behavior in the anchorage zones of prestressed bridges

    Author : Lutfi Ay; KTH; []
    Keywords : process improvement of bridges; prestressed concrete; high performance concrete;

    Abstract : This PhD thesis is divided into two parts. Part one dealswith the development of the material and the mechanicalproperties of Steel Fibrous Cement Based Composites (SFCBC) forimproving bridge design and construction. It familiarizes thehydration mechanisms of the high performance concrete with thehelp of Powers´ and Jensen´s models. READ MORE

  4. 22. Mechanical behaviour of a roller bearing steel : Strength differential effect, low temperature creep and propagation of short cracks

    Author : Irene Linares Arregui; Bo Alfredsson; Nils-Gunnar Ohlson; KTH; []
    Keywords : TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY;

    Abstract : Fatigue cracks in bearings either initiate from the surface or from an inclusion below the rolling contact surface. Then, short cracks start to propagate. Short crack grow at considerably faster rates than long cracks subjected to a nominally equivalent stress intensity factor range. READ MORE

  5. 23. Development of Structural Steels for Powder Bed Fusion - Laser Beam

    Author : William Hearn; Chalmers tekniska högskola; []
    Keywords : TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; tensile properties; in situ tempering; process development; martensite; additive manufacturing; cold cracking; low-alloy steel; structural steel; powder bed fusion – laser beam; carbon steel;

    Abstract : Over the past decade, powder bed fusion – laser beam (PBF-LB) has attracted noticeable attention from both academia and industry. However, there remains a scarcity of approved material for the process, as fewer than 40 alloys are commercially available. READ MORE

  6. 24. Very high cycle fatigue of automotive steels : Testing and computation at 20 kHz

    Author : Mohamed Sadek; Jens Bergström; Nils Hallbäck; Ulrich Krupp; Karlstads universitet; []
    Keywords : TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Very high cycle fatigue; ultrasonic fatigue testing; automotive steels; fatigue strength; stress intensity computation; crack growth; Materialteknik; Materials Engineering;

    Abstract : Mechanical fatigue failure occurs in components subjected to cyclic loading. A crack initiates at critical regions in the component and propagates during repeated loading. The expected fatigue life depends on the level, type and frequency of the loading. READ MORE

  7. 25. The influence of Pulp Type and Hot-pressing Conditions on Paper Strength Development

    Author : Tove Joelsson; Per Engstrand; Gunilla Pettersson; Anna Svedberg; Tom Lindström; Mittuniversitetet; []
    Keywords : TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Hot pressing; lignin; HYP; high strength; wet strength; softening temperature; kraft pulp; lignocellulose;

    Abstract : The hot-pressing technology has proven to have the potential for manufacturing of strong, wet stable materials based on eco-friendly renewable and recyclable lignocellulose. The purpose of this work was to study how the pulp characteristics and the hot-pressing conditions affect the dry and wet strength properties of paper. READ MORE