Search for dissertations about: "quality and defect density"
Showing result 1 - 5 of 30 swedish dissertations containing the words quality and defect density.
-
1. Topographical micro-changes in corrugated board production : effects on flexographic post-print quality
Abstract : The appearance and design of a package are key properties to attract and to focus the attention of a customer. Print quality contributes to a great degree to achieve these requirements. Most critical perceived in terms of quality are print defects like mottling, gloss and stripiness, which all appear in the printing of corrugated board. READ MORE
-
2. Low dimensional Zinc- and Copper Oxides and their Electronic, Vibrational and Photocatalytic Properties
Abstract : Pollution of water resources is a growing problem in the world and this has drawn the attention to photocatalysis, which is an emerging technology for water purification. In this thesis, low dimensional zinc oxide and copper oxides, which are promising photocatalytic materials, have been studied. READ MORE
-
3. Development of Structural Steels for Powder Bed Fusion - Laser Beam
Abstract : Over the past decade, powder bed fusion – laser beam (PBF-LB) has attracted noticeable attention from both academia and industry. However, there remains a scarcity of approved material for the process, as fewer than 40 alloys are commercially available. READ MORE
-
4. Aspects of oral implant technology and osseointegration
Abstract : Behandling med käkbensförankrade tandimplantat är en vanlig metod för att ersätta förlorade tänder hos helt och partiellt tandlösa patienter. Trots att implantatbehandling uppvisar en långsiktigt hög lyckande- och överlevnadsfrekvens (90–95% efter 10 år) så förekommer implantatförluster och marginal benförlust kring implantaten under det första året efter insättning och/eller belastning, vilket kan försämra det estetiska resultatet. READ MORE
-
5. The mechanisms of metal expansion penetration during solidification of grey cast iron
Abstract : The production of high quality castings requires the casting surface to be clean and free from defects. One type of defect often found is caused by metal penetration into the sand mould. READ MORE