Search for dissertations about: "reactive power control"
Showing result 16 - 20 of 69 swedish dissertations containing the words reactive power control.
-
16. Power System Stability Enhancement Using Shunt-connected Power Electronic Devices with Active Power Injection Capability
Abstract : Power electronic devices such as Flexible AC Transmission Systems (FACTS), both in shunt and series configuration, are widely used in the power system for power flow control, to increase the loading capability of an existing line and to increase the security of the system by enhancing its transient stability. Among the shunt-connected FACTS controllers family, the Static Synchronous Compensator (STATCOM) and the Static Var Compensator (SVC) are two key devices for reinforcing the stability of the AC power system. READ MORE
-
17. Active and reactive power control for transmission system with voltage souce converters
Abstract : .... READ MORE
-
18. Efficient Integration of Distributed Generation in Electricity Distribution Networks - Voltage Control and Network Design
Abstract : Distributed generation (DG), i.e. generation connected to the low and medium voltage distribution network (DN), has been increasing a lot during recent years. Thus the traditional assumption of a unidirectional power flow and a voltage decrease along the distribution feeders is no longer valid in all operation conditions. READ MORE
-
19. Dynamic Power System Load -Estimation of Parameters from Operational Data
Abstract : The significance of load modeling for voltage stability studies has been emphasized by several disturbances, which have taken place in the past years. They have shown that the loads in combination with other dynamics are among the main contributors of prolonged low voltage conditions, voltage instability and collapse in the power system. READ MORE
-
20. Detection of Partial Discharges at Fast Rising Voltages
Abstract : The present demand for higher efficiency and flexibility in the energy sector has ledto an increased use of power electronic generated waveforms as these allow energyconversion between different frequencies including DC. The generated waveformsare usually synthesized by so called Pulse Width Modulation (PWM) techniques,where the desired waveform is approximated by a number of square shaped pulseswith a short rise time. READ MORE