Search for dissertations about: "slags"

Showing result 1 - 5 of 221 swedish dissertations containing the word slags.

  1. 1. Densities and viscosities of slags modeling and experimental investigations

    University dissertation from Stockholm : KTH

    Author : Mikael Persson; Seshadri Seetharaman; Rob Brooks; [2006]
    Keywords : TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; density; nolar volume; thermodynamics; enthalpies; model; slags; oxide melts; viscosity; mould flux; continuous casting; TECHNOLOGY Chemical engineering Metallurgical process and manufacturing engineering Metallurgical process engineering; TEKNIKVETENSKAP Kemiteknik Metallurgisk process- och produktionsteknik Metallurgisk processteknik;

    Abstract : The present dissertation describes part of the efforts directed towards the development of computational tools to support process modeling. This work is also a further development of the Thermoslag software developed in the Division of Materials Process Science, KTH. READ MORE

  2. 2. Measurements of the thermodynamic activities of chromium  and vanadium oxides in CaO-MgO-Al2O3-SiO2 slags

    University dissertation from Stockholm : KTH

    Author : Pengli Dong; Seshadri Seetharaman; Mselly Mbwambo Nzotta; [2009]
    Keywords : TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; thermodynamic activity; chromium oxide; vanadium oxide; equilibrium; slags; slag basicity; gas-equilibration technique; TECHNOLOGY Chemical engineering Metallurgical process and manufacturing engineering Metallurgical process engineering; TEKNIKVETENSKAP Kemiteknik Metallurgisk process- och produktionsteknik Metallurgisk processteknik;

    Abstract : In the present work, the thermodynamic activities of chromium and vanadium oxide in CaO-SiO2-MgO-Al2O3 slags were measured using gas-slag equilibration technique. The slag was equilibrated with a gas mixture of CO, CO2 and Ar gases enabling well-defined oxygen partial pressures in the gas mixture (PO2=10-3,10-4,10-5 Pa) at temperatures 1803, 1823K, 1873, 1923 K. READ MORE

  3. 3. Thermodynamic Studies of the Fe-Pt System and “FeO”-Containing Slags for Application Towards Ladle Refining

    University dissertation from Stockholm : Materialvetenskap

    Author : Patrik Fredriksson; [2003]
    Keywords : Thermodynamics; Activity; Galvanic cell; Calorimetry; Gas equilibration technique; Iron-platinum alloys; FeO; Slags; Modelling; Ladle;

    Abstract : In the present work, the thermodynamic activites of ironoxide, denoted as "FeO" in the slag systems Al2O3-"FeO", CaO-"FeO", "FeO"-SiO2, Al2O3-"FeO"-SiO2, CaO-"FeO"-SiO2and "FeO"-MgO-SiO2were investigated by employing the gasequilibration technique at steelmaking temperatures. Thestrategy was to expose the molten slag mixtures kept inplatinum crucibles for an oxygen potential, determined by aCO/CO2-ratio. READ MORE

  4. 4. Sulphide capacities of mulicomponent slags

    University dissertation from Institutionen för tillämpad processmetallurgi

    Author : Mselly M. Nzotta; [1999]
    Keywords : ;

    Abstract : In the present thesis, experimental measurements have beencarried out to determine the sulphide capacities of the binaryslags Al2O3-MnO, "FeO"-SiO2, "FeO"-CaO, "FeO"-MnO, ternary slags Al2O3-MgO-SiO2, Al2O3-MnO-SiO2, Al2O3-CaO-MgO, MgO-MnO-SiO2, Al2O3-MgO-MnO,"FeO"-Al2O3-SiO2, "FeO"-CaO-SiO2, "FeO"-MgO-SiO2, "FeO"-MnO-SiO2,quatenary slags Al2O3-CaO-MgO-MnO, Al2O3- CaO-MgO-SiO2,Al2O3-CaO-MnO-SiO2, CaO-MgO-MnO-SiO2, quinary slag Al2O3-CaO-MgO-MnO-SiO2, and the six component slag "FeO"-Al2O3-CaO-MgO-MnO-SiO2.The technique used was to bring the melt to equilibrium witha gas mixturecontaining Ar-CO-CO2-SO2. READ MORE

  5. 5. Heat transfer,inclusion characteristics and fluid flow phenomena during up-hill teeming

    University dissertation from Stockholm : Materialvetenskap

    Author : Robert Eriksson; [2001]
    Keywords : Laser flash method; thermal diffusivity; slags; inclusions; water model; ingot casting; up-hill teeming;

    Abstract : Clean steel production requires good control of the sizedistribution and the composition of the inclusions at allstages of the steel making process. So far, there exists verylittle information on the behavior of the inclusion populationduring ingot casting of steel. READ MORE