Search for dissertations about: "solidification casting"
Showing result 1 - 5 of 60 swedish dissertations containing the words solidification casting.
-
1. Metal Expansion Penetration During Solidification of Grey Cast Iron
Abstract : The meta! expansion penetration has been examined experimentally. The whole casting process was simulated using a commercial software, in order to investigate the solidification characteristics and the pore formation in the casting studied. READ MORE
-
2. The mechanisms of metal expansion penetration during solidification of grey cast iron
Abstract : The production of high quality castings requires the casting surface to be clean and free from defects. One type of defect often found is caused by metal penetration into the sand mould. READ MORE
-
3. Numerical simulation of continuous casting of steel with applied magnetic field
Abstract : .... READ MORE
-
4. Heat transfer phenomena and mould flux lubrication in continuous casting of steel
Abstract : Overall thermal resistance of the mould flux was measured tomake clear the influence of the mould flux properties on theheat transfer behavior in continuous casting, especiallythermal conductivity and the formation of air gaps in thisstudy. From the investigation of the effect of the mouldsurface temperature and physical properties of the mould fluxon heat transfer through the flux film, following knowledge hasbeen obtained. READ MORE
-
5. Compacted graphite iron : On solidification phenomena related to shrinkage defects
Abstract : An improved understanding of solidification of compacted graphite iron (CGI) is necessary to predict shrinkage related casting defects. Spheroidal graphite is not only found in ductile iron (SGI) but usually also in CGI, but its characteristics and role in this material is less understood. READ MORE