Search for dissertations about: "source strength"
Showing result 6 - 10 of 155 swedish dissertations containing the words source strength.
-
6. Practical Safety Ventilation in Ultraclean Air Operating Rooms
Abstract : PRACTICAL SAFETY VENTILATION IN ULTRACLEAN AIR OPERATING ROOMS When planning new ultraclean air operating rooms, often the first question is which is the preferred room air distribution system and what system is the best to meet the requirements of microbiological air cleanliness. Today, in Sweden, the requirement is a target level of 5 CFU/m3during the design phase, in order to ensure that the level of ≤10 CFU/m3during infection prone surgery is maintained. READ MORE
-
7. Explosions in urban environments: Modelling of gas explosions and risk of premature shear failure in reinforced concrete structures
Abstract : The risk for accidental gas explosions in urban environments has increased in Sweden in recent years. This is due to densification of existing urban centres and the rise of vehicles powered by alternative fuels. READ MORE
-
8. Aging and heat-sealing properties of films based on wheat gluten
Abstract : Recently the research interest of the possibility of using wheat gluten (WG) as packaging material has greatly increased due to its combination of high gas barrier, attractive mechanical, film-forming and renewable properties. The source is also readily available and inexpensive on a worldwide basis. READ MORE
-
9. Mechanisms of Electrical Ageing of Oilimpregnated Paper due to Partial Discharges
Abstract : In this thesis, partial discharge (PD) phenomenon in oil-impregnated paper (OIP) is investigated under accelerated electrical stress. The thesis is mainly focused on the characteristic of PD activity and the influence it has on the insulation properties of OIP. READ MORE
-
10. Effects of Corona and Ozone Exposure on Properties of Polymeric Materials for High Voltage Outdoor Applications
Abstract : Despite the past four decades of service experiences with polymeric insulators in power systems all over the world, an adequate standard allowing for proper selection of polymeric materials for applications in high voltage outdoor environments has still been lacking. Therefore CIGRE Working Group D1. READ MORE