Search for dissertations about: "specific heat ratio"
Showing result 1 - 5 of 52 swedish dissertations containing the words specific heat ratio.
-
1. Single-Zone Cylinder Pressure Modeling and Estimation for Heat Release Analysis of SI Engines
Abstract : Cylinder pressure modeling and heat release analysis are today important and standard tools for engineers and researchers, when developing and tuning new engines. Being able to accurately model and extract information from the cylinder pressure is important for the interpretation and validity of the result. READ MORE
-
2. A specific heat ratio model and compression ratio estimation
Abstract : Cylinder pressure modeling and heat release analysis are today important and standard tools for engineers and researchers, when developing and tuning new engines. An accurate specific heat ratio model is important for an accurate heat release analysis, since the specific heat ratio couples the systems energy to other thermodynamic quantities. READ MORE
-
3. Exhaust Heat Utilisation and Losses in Internal Combustion Engines with Focus on the Gas Exchange System
Abstract : Exhaust gas energy recovery should be considered in improving fuel economy of internal combustion engines. A large portion of fuel energy is wasted through the exhaust of internal combustion engines. Turbocharger and turbocompound can, however, recover part of this wasted heat. READ MORE
-
4. Optimal Pin Fin Heat Exchanger Surface
Abstract : This research presents the results of numerical study of heat transfer and pressure drop in a heat exchanger that is designed with different shape pin fins. The heat exchanger used for this research consists of a rectangular duct fitted with different shape pin fins, and is heated from the lower plate. READ MORE
-
5. Borehole Thermal Energy Storage Systems for Storage of Industrial Excess Heat : Performance Evaluation and Modelling
Abstract : Improving industrial energy efficiency is considered an important factor in reducing carbon dioxide emissions and counteract climate change. For many industrial companies in cold climates, heat generated at the site in summer will not be needed to fulfil the site heat demand during this time, and is thus removed to the outdoor air. READ MORE