Search for dissertations about: "steel flow"

Showing result 1 - 5 of 137 swedish dissertations containing the words steel flow.

  1. 1. A Study on Particle Motion and Deposition Rate Application in Steel Flows

    University dissertation from Stockholm : KTH Royal Institute of Technology

    Author : Peiyuan Ni; KTH.; [2015]
    Keywords : TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; steel flow; ladle teeming; continuous casting; non-metallic inclusion behavior; particle deposition; nozzle clogging; numerical simulation.;

    Abstract : Non-metallic inclusions in molten steel have received worldwide attention due to their serious influence on both the steel product quality and the steel production process. These inclusions may come from the de-oxidation process, the re-oxidation by air and/or slag due to an entrainment during steel transfer, and so on. READ MORE

  2. 2. Experimental Heat Transfer, pressure drop, and Flow Visualization of R-134a in Vertical Mini/Micro Tubes

    University dissertation from Stockholm : KTH

    Author : Wahib Owhaib; KTH.; [2007]
    Keywords : TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Minichannel; microchannel; heat transfer; pressure drop; single-phase; two-phase; flow boiling; flow visualization; dry out; bubble behavior; flow pattern.; TECHNOLOGY Engineering mechanics Mechanical and thermal engineering Mechanical energy engineering; TEKNIKVETENSKAP Teknisk mekanik Mekanisk och termisk energiteknik Mekanisk energiteknik;

    Abstract : For the application of minichannel heat exchangers, it is necessary to have accurate design tools for predicting heat transfer and pressure drop. Until recently, this type of heat exchangers was not well studied, and in the scientific literature there were large discrepancies between results reported by different investigators. READ MORE

  3. 3. Numerical Study on Steel Flow and Inclusion Behavior during a Ladle Teeming Process

    University dissertation from Stockholm : KTH Royal Institute of Technology

    Author : Peiyuan Ni; KTH.; [2013]
    Keywords : TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; steel flow; ladle teeming; numerical simulation; inclusion behavior; CFD; clogging; deposition.;

    Abstract : Inclusions in molten steel have received worldwide concern due to their serious influence on both the steel product quality and the steel production process. These inclusions may come from the deoxidation process, reoxidation by air and/or slag due to an entrainment during steel transfer, and so on. READ MORE

  4. 4. The influence of tool steel microstructure on galling

    University dissertation from Karlstad : Karlstads universitet

    Author : Patrik Karlsson; Karlstads universitet.; [2014]
    Keywords : TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Materials Engineering; Materialteknik; Galling; Microstructure; Material transfer; Tool steel; Stainless steel; Metall transfer;

    Abstract : In sheet metal forming (SMF) of materials such as stainless steels there is a major problem with transfer and accumulation of sheet material to the metal forming tool surface. The problem is known as galling; a sort of severe adhesive wear, which results in severe scratching of produced parts. READ MORE

  5. 5. Fundamental Mathematical Modeling of Gas Injection in AOD Converters with Emphasis on the Inlet

    University dissertation from Stockholm : Materialvetenskap

    Author : Anders Tilliander; KTH.; [2003]
    Keywords : AOD; nozzle; modeling; steel; fluid flow; gas injection.;

    Abstract : The overall purpose of the present work has been to developa novel mathematical model of the gas injection in the AODconverter process, based on fundamental transport equations.The model development was divided into two major steps, wherethe first step involved modeling of gas injection through acylindrical nozzle at high gas flow rates (the nozzle model). READ MORE