Search for dissertations about: "steel flow"

Showing result 21 - 25 of 167 swedish dissertations containing the words steel flow.

  2. 21. The early stage of galling

    Author : Patrik Karlsson; Pavel Krakhmalev; Anders Gåård; Braham Prakash; Örebro universitet; []
    Keywords : TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Galling; Stainless steel; Tool steel; Friction; Sliding wear; SOFS; Tribology; Wear; Materialteknik; Materials Engineering;

    Abstract : In sheet metal forming (SMF) of materials such as stainless steels there is a major problem with transfer and accumulation of sheet material to the metal forming tool surface. The problem is known as galling; a kind of severe adhesive wear, which results in severe scratching of produced parts. READ MORE

  4. 22. A Study of the Initial Mould Filling during Up-hill Ingot Casting

    Author : Line Hallgren; Pär Jönsson; Anders Tilliander; Seppo Louhenkilpi; KTH; []
    Keywords : TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; swirling flow; up-hill teeming; nozzle; casting; fluid flow; modelling; CFD; LDA; swirl; ingot casting; filling; red eye;

    Abstract : The fluid flow in the mould during up-hill teeming is of great importance for the quality of the cast ingot and thereby the quality of the final steel products. At the early stage of the filling of an up-hill teeming mould, liquid steel flows with a high velocity from the runner into the mould. READ MORE

  5. 23. A study of flow fields during filling of a sampler

    Author : Zhi Zhang; Pär Jönsson; Dongyuan Sheng; KTH; []
    Keywords : TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; physical modeling; flow pattern; vortex; filling; PIV; sampler; simulation; turbulence; Wilcox k-ω model; Materials science; Teknisk materialvetenskap; Metallurgical process engineering; Metallurgisk processteknik;

    Abstract : More and more attention has been paid to decreasing the number and size of non-metallic inclusions existing in the final products recently in steel industries. Therefore, more efforts have been made to monitor the inclusions' size distributions during the metallurgy process, especially at the secondary steelmaking period. READ MORE

  6. 24. A Study of Parameters that Influence the Kinetics of the AOD Decarburisation Process

    Author : Patrik Ternstedt; Anders Tilliander; Ville-Valteri Visuri; KTH; []
    Keywords : TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; AOD; decarburization; steel; slags; composition; petrography; physical modeling; industrial plant trials; AOD; avkolning; stål; slagg; sammansättning; petrografi; fysikalisk modellering; industriella försök; Teknisk materialvetenskap; Materials Science and Engineering; Metallurgical process science; Metallurgisk processvetenskap;

    Abstract : This thesis focuses on the AOD process, which is an important metallurgical reactor in stainless steel production. To be more specific, the thesis is limited to study the decarburisation step, which is the first of three process steps in the AOD converter. READ MORE

  7. 25. Hardening of Carbon Steel by Water Impinging Jet Quenching Technique : Differential Cooling of Steel Sheets and Quenching of Cylindrical Bars

    Author : Pavel Romanov; Mattias Calmunger; Bahram Moshfegh; Viktor Norman; Ru Peng; Peter Hedström; Linköpings universitet; []
    Keywords : TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Differential cooling; Impinging jet quenching; Microstructure gradient; Hardening;

    Abstract : Austenitization followed by quenching is a well-known conventional heat-treating procedure which is widely used on carbon steels with the aim to obtain high strength in as-quenched condition. Such quenching is usually done by immersing a steel product into the cooling medium which provides a uniform cooling of the surface. READ MORE