Search for dissertations about: "surface defects"
Showing result 6 - 10 of 391 swedish dissertations containing the words surface defects.
-
6. Investigation of Surface Formation in As-Cast and Homogenized 6xxx Aluminium Billets
Abstract : The direct chill (DC) casting technique to produce billets for extrusion and ingots for rollingwas developed in the 1930s. The principle, which is still valid, is a two-stage cooling with a primary cooling at a mould surface followed by water spraying directly on the surface. READ MORE
-
7. Surface Interactions in Powder Injection Moulding
Abstract : Powder Injection Moulding (PIM) is an attractive technique for producing complex components in large quantities my means of powder technology. The process includes mixing powder with a suitable binder, usually a thermoplastic polymer. Because of the large attractive forces between small particles the powder can be agglomerated in the binder. READ MORE
-
8. Surface Reactivity and Electronic Structure of Metal Oxides
Abstract : The foci of this thesis are the metal oxides Cu2O, ZnO and Fe3O4 and their interaction with water and sulfur dioxide (SO2). The intention is to study SO2-induced atmospheric corrosion on a molecular level. All studies are based on photoelectron spectroscopy (PES) and scanning tunneling microscopy (STM) measurements. READ MORE
-
9. Evolution of artificial defects during shape rolling
Abstract : Very often defects are present in rolled products. For wire rods, defects are very deleterious since the wire rods are generally used directly in various applications. For this reason, the market nowadays requires wire rods to be completely defect-free. Any wire with defects must be rejected as scrap which is very costly for the production mill. READ MORE
-
10. Polishability of tool steels : Characterisation of high gloss polished tool steels
Abstract : The manufacturing of plastic components, like a majority of other mass produced discrete parts, require well designed dies and moulds. Complex geometries and increasing demands on final surface appearance, which is strongly connected to the quality impression, are pushing for high demands on mould-makers and polishers as well as steel producers. READ MORE