Search for dissertations about: "swirling flow"
Showing result 21 - 25 of 63 swedish dissertations containing the words swirling flow.
-
21. Some Aspects of Improving Initial Filling Conditions and Steel Cleanliness by Flow Pattern Control Using a Swirling Flow in the Uphill Teeming Process
Abstract : The flow pattern has widely been recognized to have an impact on the exogenous non-metallic inclusion generation in the gating system and mold flux entrapment in the uphill teeming process. Thus, a well-controlled flow pattern during the teeming process can improve the quality of ingots and further increase the yield during steel production. READ MORE
-
22. Utilization of Decomposition Techniques for Analyzing and Characterizing Flows
Abstract : This thesis presents the utilization of two different decomposition techniques, proper orthogonal decomposition (POD) and dynamic mode decomposition (DMD), for enhanced understanding of flow structures and their stability. The advantages of these techniques are shown for a range of flow situations, most of which are turbulent. READ MORE
-
23. Experimental study of passive scalar mixing in swirling jet flows
Abstract : Despite its importance in various industrial applications there is still a lack of experimental studies on the dynamic and thermal field of swirling jets in the near-field region. The present study is an attempt to close this lack and provide new insights on the effect of rotation on the turbulent mixing of a passive scalar, on turbulence (joint) statistics as well as the turbulence structure. READ MORE
-
24. Optimization of Chemical Kinetic Mechanisms and Numerical Simulations of Industrial Gas Turbine Burners
Abstract : Increasing demands on environmentally friendly energy conversion indicate that pollutants need to be reduced. Computational Fluid Dynamics is efficiently used today in turbulent reaction flow simulations to gain a deeper understanding of the combustion process and consequently be able to improve combustor design and reduce emissions. READ MORE
-
25. Evaluation and modeling of the flow in a slotted wall wind tunnel
Abstract : As vehicle manufacturers strive to shorten the development time of new models, an increasing share of the aerodynamic development work is shifted from wind tunnel testing of prototype vehicles to numerical simulations of virtual models. However, comparing measurements from the wind tunnel with numerical simulation data is not straightforward due to several interference effects occurring between the wind tunnel and the tested vehicle. READ MORE