Search for dissertations about: "technology 2012"
Showing result 1 - 5 of 1236 swedish dissertations containing the words technology 2012.
-
1. Tailoring adhesion and wetting properties of cellulose fibers and model surfaces
Abstract : The layer-by-layer (LbL) technique was used to modify the surface of cellulose fibers by consecutive adsorption of poly(allylamine hydrochloride) (PAH) and poly(acrylic acid) (PAA) followed by a final adsorbed layer of anionic paraffin wax colloids. Paper hand sheets made from the modified fibers were found to be highly hydrophobic with a contact angle of 150°. READ MORE
-
2. Application of cohesive modeling in joining technology : Thick adhesive layers and rivet joints
Abstract : This thesis summarizes the development of cohesive modeling of joints. It presents some new developments regarding the effects of non-zero thickness of adhesive layers and a novel approach of using the concept of cohesive modeling to characterize the failure behavior of rivet joints. READ MORE
-
3. Ceria-based Nanostructured Materials for Low-Temperature Solid Oxide Fuel Cells
Abstract : As one of the most efficient and environmentally benign energy conversion devices, solid oxide fuel cells (SOFC) have attracted much attention in recent years. Conventional SOFC with yttria-stabilized zirconia as electrolyte require high operation temperature (800-1000 °C), which causes significant problems like material degradation, as well as other technological complications and economic barrier for wider applications. READ MORE
-
4. Spin valves and spin-torque oscillators with perpendicualr magnetic anisotropy
Abstract : Researches in spintronics, especially those remarkably classified in the current induced spin-transfer torque (STT) framework, circumvent challenges with different materials and geometries. Perpendicular magnetic anisotropy (PMA) materials are showing capability of holding promise to be employed in STT based spintronics elements, e.g. READ MORE
-
5. Development of Protein-Functionalized Magnetic Iron Oxide Nanoparticles: Potential Application in Water Treatment
Abstract : The treatment of water to make it safe for human consumption is a problem of immense concern, both in developing and developed countries. However, the production of clean water with chemicals as coagulants has several drawbacks associated with cost, health risks and complexity in sludge management. READ MORE