Search for dissertations about: "temperature measurements"

Showing result 11 - 15 of 1426 swedish dissertations containing the words temperature measurements.

  2. 11. Precision mass measurements : Final limit of SMILETRAP I and the developments of SMILETRAP II

    Author : Andreas Solders; Reinhold Schuch; Juha Äystö; Stockholms universitet; []
    Keywords : NATURVETENSKAP; NATURAL SCIENCES; SMILETRAP; Precision mass spectrometry; Penning trap; Atomic mass; Highly charged ions; Low energy ion storage; Time of flight ion cyclotron resonance; High frequency; Proton mass; QED; g-factor; Physics; Fysik; Physics; fysik;

    Abstract : The subject of this thesis is high-precision mass-measurements performed with Penning trap mass spectrometers (PTMS). In particular it describes the SMILETRAP I PTMS and the final results obtained with it, the masses of 40Ca and that of the proton. READ MORE

  4. 12. To analyse measurements is to know!

    Author : Henrik Gadd; Institutionen för energivetenskaper; []
    Keywords : TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; District heating; Hourly meter readings; fault detection; Low return temperature; temperature difference.;

    Abstract : Renewable energy sources dominated the world energy supply until the beginning of the 20th century, when fossil energy became the dominant energy source worldwide. Today, fossil fuels contribute to over 80% of world energy supply. But there are two major reasons why fossil energy use has to stop. READ MORE

  5. 13. An experimental investigation of spur gear efficiency and temperature : A comparison between ground and superfinished surfaces

    Author : Martin Andersson; Ulf Olofsson; Bengt-Göran Rosén; KTH; []
    Keywords : TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; gears; ground; superfinished; efficiency; temperature; running-in; dip lubrication; spray lubrication; Machine Design; Maskinkonstruktion;

    Abstract : This thesis focuses on reliability when testing gear efficiency and on how gear mesh efficiency can be increased without detrimental effects on the gears. Test equipment commonly used in gear research was analysed to identify important parameters for gear efficiency testing. READ MORE

  6. 14. Non-contact surface wave measurements on pavements

    Author : Henrik Bjurström; Nils Rydén; Björn Birgisson; Jinying Zhu; KTH; []
    Keywords : TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; seismic testing; asphalt concrete; dynamic modulus; non-contact measurements; rolling measurements; surface waves; Lamb waves; MEMS microphones; Byggvetenskap; Civil and Architectural Engineering;

    Abstract : In this thesis, nondestructive surface wave measurements are presented for characterization of dynamic modulus and layer thickness on different pavements and cement concrete slabs. Air-coupled microphones enable rapid data acquisition without physical contact with the pavement surface. READ MORE

  7. 15. Determination of Material Properties for Fire Modelling

    Author : Ulf Göransson; Avdelningen för Brandteknik; []
    Keywords : TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Material properties; Material degradation; Measurements; Fire test data; Byggnadsteknik; Building construction; Teknik; Technological sciences; Fire; Surface temperature; Mathematical modelling;

    Abstract : Fire and flame spread are very complex phenomenon to study. Several aspects need to be considered and treated. In order to be able to do a correct analysis of the flame spread phenomenon, which is necessary to be able to predict flame spread, knowledge of material properties are needed. Material properties can be obtained in different ways. READ MORE