Search for dissertations about: "thermal analysis material"

Showing result 16 - 20 of 334 swedish dissertations containing the words thermal analysis material.

  2. 16. The mechanisms of metal expansion penetration during solidification of grey cast iron

    Author : Izudin Dugic; Preben Norgaard Hansén; Linköpings universitet; []
    Keywords : TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Grey cast iron; solidification; solidification modelling; graphite expansion; molar volume; casting simulation; thermal analysis; thermoanalysis cup; casting temperature; inoculation; inoculant; metal expansion penetration; eutectic cell size; primary austenite; austenite grain; TECHNOLOGY; TEKNIKVETENSKAP;

    Abstract : The production of high quality castings requires the casting surface to be clean and free from defects. One type of defect often found is caused by metal penetration into the sand mould. READ MORE

  4. 17. The Effect of Processing Parameters and Alloy Composition on the Microstructure Formation and Quality of DC Cast Aluminium Alloys

    Author : Majed Jaradeh; Torbjörn Carlberg; Lars Arnberg; KTH; []
    Keywords : TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Aluminium wrought alloys; AA3xxx and 6xxx; Direct Chill Casting; Unidirectional Solidification; Bridgman technique; Process parameters; Microstructure; Composition modification; Thermal analysis; Inclusions; Metallographical investigations; Metallurgical process engineering; Metallurgisk processteknik;

    Abstract : The objective of this research is to increase the understanding of the solidification behaviour of some industrially important wrought aluminium alloys. The investigation methods range from direct investigations of as-cast ingots to laboratory-scale techniques in which ingot casting is simulated. READ MORE

  5. 18. Microstructural Characterization of Expanded Austenite in 304L and 904L Austenitic Stainless Steels

    Author : Giulio Maistro; Chalmers tekniska högskola; []
    Keywords : TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; low-temperature thermochemical treatment; S-phase; SEM; thermal stability; surface engineering; surface analysis; EBSD; XRD; austenitic stainless steel; XPS; GDOES; Expanded austenite;

    Abstract : Austenitic stainless steels are among the most used materials in modern industry, mainly because of their superior corrosion resistance. However, low hardness and poor tribological properties often restrict their applicability. READ MORE

  6. 19. Assessment and improvements of thermal-hydraulic correlations and methods for the analysis of the Jules Horowitz Reactor

    Author : Alberto Ghione; Chalmers tekniska högskola; []
    Keywords : TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; NATURVETENSKAP; NATURAL SCIENCES; Flow instability; Uncertainty; Narrow channels; Jules Horowitz Reactor; Safety analysis; Critical heat flux; Thermal-hydraulic correlations; Heat transfer; Best-Estimate; Material Testing Reactor;

    Abstract : Nuclear research reactors are used to test materials for current and future nuclear technologies, and to produce radioisotopes for medical purposes. Most of the existing Material Testing Reactors in Europe have operated for more than 50 years and new ones are needed. READ MORE

  7. 20. Comprehensive numerical analysis of stress state in adhesive layer of joint including thermal residual stress and material non-linearity

    Author : Nawres Jabar Al-Ramahi; Roberts Joffe; Janis Varna; Lars Mikkelsen; Luleå tekniska universitet; []
    Keywords : TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Single-lap adhesive joint; Double-lap adhesive joint; Unbalanced bi-material DCB; Residual thermal stresses; Finite element method; Crack path; Crack closure; Polymeric Composite Materials; Polymera kompositmaterial;

    Abstract : The main objective of this work is to improve understanding of the stress state in the adhesive layer of bonded joints and identify key parameters which govern performance of adhesive joints. This information is crucial for the prediction of the failure initiation and propagation with the further estimation of the durability and strength of adhesively bonded structures. READ MORE