Search for dissertations about: "thermal parameters of building"
Showing result 21 - 25 of 58 swedish dissertations containing the words thermal parameters of building.
-
21. A Systematic Approach to Integrated Building Performance Assessment and Visualisation
Abstract : The aim of this project was to develop a holistic approach to building-performance assessment without limiting it to energy use (usually expressed in kWh/m2/year), but rather include more parameters that represent the following aspects: Economic, environmental, and quality of service provided to the occupant/client. If it can be shown that buildings can be operated not only in an energy-efficient way, but also in a way that takes into consideration the needs of the occupants, a case could be built that a higher quality of indoor environment does not necessarily mean a higher economic impact. READ MORE
-
22. Modelling Life Cycle Cost for Indoor Climate Systems
Abstract : The indoor climate system, which serves a building with a proper indoor air quality and thermal comfort, has been predominantly designed based on the initial cost. A life cycle approach could improve both the economic and environmental performance since the energy use could decrease. READ MORE
-
23. Thermal Conductivity of Hygroscopic Foams Based on Cellulose Nanomaterials
Abstract : Biobased super-insulating materials could mitigate climate change by minimizing the use of petroleum-based materials, creating artificial carbon sinks and minimizing the energy needed to maintain pleasant interior conditions. Cellulose nanomaterials (CNM) produced from abundantly available cellulose sources constitute versatile, highly anisotropic raw materials with tunable surface chemistry and high strength. READ MORE
-
24. Fire temperature development in enclosures : Some theoretical and experimental studies
Abstract : This thesis is devoted to problems connected to heat transfer and fire dynamics in enclosures. The thesis consists of a main part which summarizes and discusses the theory of heat transfer, conservation of energy and fire dynamics. Based on these theories, some cases of different fire scenarios have been analyzed. READ MORE
-
25. Additive manufacturing of Ni-based Superalloys- an analysis of parameter and strategy driven properties in Electron Beam Melting Process
Abstract : Metal AM processes produce significantly rough surfaces as compared to wrought or machined components. Currently, the as-EBM surfaces are extremely rough and consequently, the as-built components could not be directly used as commercial products. The state-of-the-art research has focused primarily on deeply machined (DM) samples. READ MORE