Search for dissertations about: "thesis in timber concrete technology"
Showing result 21 - 25 of 32 swedish dissertations containing the words thesis in timber concrete technology.
-
21. Off-site manufacturing systems development in timber house building : Towards mass customization-oriented manufacturing
Abstract : The need for housing in Sweden has been showing a constant increase over the past couple of years. However, this situation might change in 2018 since there are indications that the increase in demand will reach its peak. READ MORE
-
22. On the improvement of low frequency sound insulation in wooden buildings
Abstract : Wooden multi-family residential houses continue to gain in popularity. Compared to concrete, wooden constructions have low mass and are subject to relatively poor sound insulation at low frequencies. READ MORE
-
23. Climate impact of the sustainable use of forest biomass in energy and material system : a life cycle perspective
Abstract : Human society releases greenhouse gas emissions to the atmosphere while providing housing, heat, mobility and industrial production. Man-made greenhouse gas emissions are the main causes of climate change, coming mainly from burning fossil fuels and land-use changes. READ MORE
-
24. Experimental investigations into deformations resulting from stresses perpendicular to grain in Swedish whitewood and redwood in respect of the dimensioning of concrete formwork
Abstract : Deformations resulting from stresses perpendicular to grain in concrete formwork involving wooden shoring members have given rise to a number of problems on building sites. No quantitative relations between stresses perpendicular to grain and deformations have as yet been forthcoming. READ MORE
-
25. Bracing of steel bridges during construction; theory, full-scale tests and simulations
Abstract : A number of steel bridges have suffered lateral-torsional failure during their construction due to their lacking adequate lateral and/or rotational stiffness. In most cases, slight bracing can be of great benefit to the main girders involved through their controlling out-of-plane deformations and enabling the resistance that is needed to be achieved. READ MORE