Advanced search
Showing result 1 - 5 of 57 swedish dissertations matching the above criteria.
-
1. Machinability variations in Alloy 718 —With focus on machining of turbine components
Abstract : In gas turbine engine, nickel base alloy, such as Alloy 718, accounts for almost half of the total material requirement. Nickel-base superalloys are used for gas turbine components mainly because of their outstanding strength and resistance to oxidation at high temperatures (> 550°C). READ MORE
-
2. Machinability variations in alloy 718 turbine components
Abstract : Machinability Variations in Alloy 718 Turbine Components PAJAZIT AVDOVIC Department of Materials and Manufacturing TechnologyChalmers University of Technology AbstractAlloy 718 has a reputation for being very troublesome during the cutting process. It was suspected that this material was too hard and having too fine grain size and that these characteristics caused damage to cutting tools during processing. READ MORE
-
3. The effect of workpiece material and its microstructure on tool wear in metal cutting
Abstract : The aim of the present work is to promote the basic understanding of how the workpiece material and its microstructure affect the tool wear during metal cutting. To isolate the effect of the workpiece material, the tool material (uncoated cemented carbide) was kept constant while the workpiece was varied. READ MORE
-
4. Condition Monitoring in Machining Using Internal Sensor Signals
Abstract : Condition monitoring of critical machine tool components and machining processes is a key factor to increase the availability of the machine tool and to achieve a more robust machining process. Any failure in the machining process and machine tool components may have negative effects on the final produced part. READ MORE
-
5. Influence of Microstructure in Machining of Nickel and Nickel-Iron Based Alloys
Abstract : Superalloys are used in applications such as turbines, steam power plants and nuclear power systems in components that require good high temperature properties and/or corrosion resistance. They are classified as difficult-to-cut materials and hence, from a sustainable production point of view, tool wear and tool life are major factors when machining these alloys. READ MORE