Search for dissertations about: "weld oxides"

Found 5 swedish dissertations containing the words weld oxides.

  2. 1. Welds in the lean duplex stainless steel LDX 2101 : effect of microstructure and weld oxides on corrosion properties

    Author : Elin M. Westin; John Ågren; KTH; []
    Keywords : TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Duplex stainless steel; welding; weld metal; HAZ; nitrogen; manganese; austenite formation; phase balance; precipitates; pitting resistance; heat input; solidification; element loss; evaporation; deposition; weld oxides; discoloration; mechanical properties; thermo-mechanical simulation; Geeble; GTA; laser; LOM; SEM; EDS; TEM; Leco; EPMA; ferroxyl test; XPS; post weld cleaning; pickling; Materials science; Teknisk materialvetenskap;

    Abstract : Duplex stainless steels are a very attractive alternative to austenitic grades due to their higher strength and good corrosion performance. The austenitic grades can often be welded autogenously, while the duplex grades normally require addition of filler metal. READ MORE

  4. 2. Localized corrosion of stainless steels in chlorine dioxide bleach filtrate solutions

    Author : Gustaf Bäck; KTH; []
    Keywords : stainless steels; bleaching; chlorine dioxide; ClO2; localized corrosion; weld oxides; redox potential; potentiostatic polarization; scanning Kelvin probe;

    Abstract : Stainless steels are extensively used in pulp bleach plantsbecause of their high corrosion resistance. However, alsostainless steels might suffer from corrosion and in bleachplants this is a problem. READ MORE

  5. 3. Experimental Study on Cold Lap Formation in Tandem Gas Metal Arc Welding

    Author : Peigang Li; Chalmers tekniska högskola; []
    Keywords : TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; oxides; imperfection; spatter; silicon; lack of fusion; overflow; temperature energy; overlap; cold lap; manganese; tandem GMAW;

    Abstract : Tandem gas metal arc welding (GMAW) is a high productivity welding process which is appliedin many industries. However, a type of imperfection, known as cold lap, was revealed thatmostly accompanies the tandem GMAW process. READ MORE

  6. 4. Cold lap formation in Gas Metal Arc Welding of steel : An experimental study of micro-lack of fusion defects

    Author : Peigang Li; Lars-Erik Svensson; Norbert Enzinger; Högskolan Väst; []
    Keywords : TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Tandem GMAW; old laps; lack of fusion; Spatter; Overlap; Overflow; Manganese; Silicon; Oxides; Temperature; Manufacturing and materials engineering; Produktions- och materialteknik;

    Abstract : Cold laps are defined as micro-lack of fusion defects at the weld toe more or less parallel to the surface of the parent plate. These defects are known to negatively influence the fatigue properties of weldments. Previous studies suggest that cold lap formation can not be avoided completely in Gas Metal Arc Welding (GMAW). READ MORE

  7. 5. Use of localised techniques to elucidate the influence of process variables on the corrosion of stainless steels

    Author : Nuria Fuertes; Rachel Pettersson; Inger Odnevall; Stuart Lyon; KTH; []
    Keywords : TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Stainless steel; corrosion; passive film; thermal oxides; Volta potential; pickling; deformation; cold rolling; AM; SKPFM; SVET; Kemi; Chemistry;

    Abstract : Several factors during steel manufacture and fabrication can alter the passivity and corrosion behaviour of stainless steels. These include alloying, deformation, welding and heat treatments. READ MORE