Search for dissertations about: "wind stabilization"
Showing result 1 - 5 of 7 swedish dissertations containing the words wind stabilization.
-
1. On the Attachment of Lightning Flashes to Wind Turbines
Abstract : The work presented in this thesis aims at investigating the attachment of lightning flashes to wind turbines. Modern wind turbines are highly exposed to lightning strikes, due to the increase of their height and the rotation of the blades. Upward lightning is the dominant mechanism of lightning strikes to them. READ MORE
-
2. Shear walls for multi-storey timber buildings
Abstract : Wind loads acting on wooden building structures need to be dealt with adequately in order to ensure that neither the serviceability limit state nor the ultimate limit state is exceeded. For the structural designer of tall buildings, avoiding the possibly serious consequences of heavy wind loading while taking account at the same time of the effects of gravitation can be a real challenge. READ MORE
-
3. Analysis of shear walls for multi-storey timber buildings
Abstract : This doctoral thesis addresses questions of how wind loads acting on multistoreytimber buildings can be dealt with by structural design of such buildings.The conventional use of sheathing either nailed or screwed to a timberframework is considered, together with other stabilizing structures such ascross-laminated timber panels. READ MORE
-
4. Voltage sag ride-through of AC drives : control and analysis
Abstract : This thesis focuses on controller design and analysis for induction motor (IM) drives, flux control for electrically excited synchronous motors with damper windings (EESMs), and to enhance voltage sag ride-through ability and analysis for a wind turbine application with a full-power grid-connected active rectifier. The goal is to be able to use the existing equipment, without altering the hardware. READ MORE
-
5. An experimental investigation of flow in a Kaplan runner : steady-state and transient
Abstract : Water turbines are since some years widely used for grid stabilization purposes according to their exceptional load variation capability which gives them the ability to compensate grid fluctuations initiated by the customer’s consumption or intermittent electricity production systems such as wind and solar power. Different renewable power generation technologies can be combined in mini-grids to electrify isolated villages and extend existing grid networks. READ MORE