Search for dissertations about: "wire mesh"

Found 5 swedish dissertations containing the words wire mesh.

  2. 1. Ventilation Flow Field Characteristics of a Hydro-Generator Model- An experimental and Numerical Study

    Author : Hamed Jamshidi; Chalmers tekniska högskola; []
    Keywords : TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Naphthalene Sublimation Technique; Hydro Power Generator; Ventilation; Experiment; CFD;

    Abstract : Hydro-generators are complex machines used to convert the mechanical energy of the water turbine into electrical energy. Electromagnetic and mechanical losses accompany this energy conversion process which will cause heat generation and temperature increase. Cooling systems are needed to remove this excess heat from hydro-generators. READ MORE

  4. 2. Wings, turbulent boundary layers and flow separation

    Author : Fermin Mallor; Philipp Schlatter; Ricardo Vinuesa; Ramis Örlü; Manuel García Villalba; KTH; []
    Keywords : TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Wings; turbulent boundary layers; adverse pressure gradients; flow separation; numerical simulations; wind-tunnel experiments; flow control.; Vingar; turbulenta gränsskikt; negativa tryckgradienter; avlösning; numeriska simuleringar; vindtunnel-experiment; flow control; Aerospace Engineering; Flyg- och rymdteknik; Teknisk mekanik; Engineering Mechanics;

    Abstract : The present doctoral thesis investigates the turbulent flow developing around wing sections, focusing on the impact of adverse-pressure-gradient (APG) conditions on turbulent boundary layers (TBLs) and the physics of flow separation. Both experimental and numerical methods are employed to generate high-fidelity data sets and provide an in-depth analysis of the flow. READ MORE

  5. 3. Performance and Energy Efficient Network-on-Chip Architectures

    Author : Sriram Vangal; Atila Alvandpour; Wim Dehaene; Linköpings universitet; []
    Keywords : TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Chips; MOS transistors; Network-on-Chip NoC ; process technology; FPMAC; Electrical engineering; Elektroteknik;

    Abstract : The scaling of MOS transistors into the nanometer regime opens the possibility for creating large Network-on-Chip (NoC) architectures containing hundreds of integrated processing elements with on-chip communication. NoC architectures, with structured on-chip networks are emerging as a scalable and modular solution to global communications within large systems-on-chip. READ MORE

  6. 4. Numerical predictions and measurement of non-isothermal airflows : evaluation of buoyant wall jets and airflow through large openings

    Author : Tobias Törnström; Linköpings universitet; []
    Keywords : TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY;

    Abstract : How can we attain a good indoor climate and at the same time reduce energy consumption? These issues are of particular interest in countries with cold climates, where the need for heating is large. It is important to design a HV AC (Heating, Ventilation and Air Conditioning) system that achieves a desirable indoor climate, where discomfort due to draft and thermal discomfort is avoided. READ MORE

  7. 5. Distributions Of Fiber Characteristics As A Tool To Evaluate Mechanical Pulps

    Author : Sofia Reyier Österling; Per Engstrand; Hans Höglund; Olof Ferritsius; Rita Ferritsius; Hans Ersson; Per Gradin; Mittuniversitetet; []
    Keywords : TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Fiber; fibre; fiber characteristics; fiber dimension; fiber properties; mechanical pulp; FiberLab; raw data; distribution; fiber wall thickness; BIN; bonding ability influence; bonding indicator; bonding ability; fiber width; fibrillation; collapse resistance; laboratory sheet; fiber analyzer; optical analyzer; TMP; CTMP; SGW; sheet model; prediction; fiber characterization; hydrocyclone; fractionation; kernel density estimation; KDE; diffusion mixing; acoustic emission; F0.90; Norway spruce; Picea abies;

    Abstract : Mechanical pulps are used in paper products such as magazine or news grade printing papers or paperboard. Mechanical pulping gives a high yield; nearly everything in the tree except the bark is used in the paper. This means that mechanical pulping consumes much less wood than chemical pulping, especially to produce a unit area of printing surface. READ MORE