Synthesis and modification of potential CO2 adsorbents : Amine modified silica and calcium carbonates

Abstract: The prospect of rapid changes to the climate due to global warming is subject of public concern. The need to reduce the emissions of atmospheric green house gases and in particular carbon dioxide is greater than ever. Extensive research is performed to find new solutions and new materials, which tackles this problem in economically benign way. This thesis dealt with two potential adsorbents for post combustion  carbon capture, namely, amine modified silica and calcium carbonates. We modified porous silica with large surface area by propyl-amine groups to enhance the carbon dioxide adsorption capacity and selectivity. Experimental parameters, such as reaction time, temperature, water content, acid and heat treatment of silica substrate were optimized using a fractional factorial design. Adsorption properties and the nature of formed species upon reaction of CO2 and amine-modified silica were studied by sorption and infrared spectroscopy. Physisorbed and chemisorbed amount of adsorbed CO2 were, for the first time, estimated directly in an accurate way. The effects of temperature and moisture on the CO2 adsorption properties were also studied.Crystallization of calcium carbonate as a precursor to calcium oxide, which can be used as carbon dioxide absorbent, was studied in the second part of this thesis. Structure of different amorphous phases of calcium carbonate was studied in detail. Crystallization of calcium carbonate with and without additives was studied. Parameters like stirring rate, temperature, pH and polymer concentration showed to be important in selection of phase and morphology. An aggregation mediated crystallization was postulated to explain the observed morphologies.