Numerical study of flame dynamics

Abstract: Modern industrial society is based on combustion with ever increasing standards on the efficiency of burning. One of the main combustion characteristics is the burning rate, which is influenced by intrinsic flame instabilities, external turbulence and flame interaction with walls of combustor and sound waves.In the present work we started with the problem how to include combustion along the vortex axis into the general theory of turbulent burning. We demonstrated that the most representative geometry for such problem is a hypothetic “tube” with rotating gaseous mixture. We obtained that burning in a vortex is similar to the bubble motion in an effective acceleration field created by the centrifugal force. If the intensity of the vortex is rather high then the flame speed is determined mostly by the velocity of the bubble. The results obtained complement the renormalization theory of turbulent burning. Using the results on flame propagation along a vortex we calculated the turbulent flame velocity, compared it to the experiments and found rather good agreement.All experiments on turbulent combustion in tubes inevitably involve flame interaction with walls. In the present thesis flame propagation in the geometry of a tube with nonslip walls has been widely studied numerically and analytically. We obtained that in the case of an open tube flame interaction with nonslip walls leads to the oscillating regime of burning. The oscillations are accompanied by variations of the curved flame shape and the velocity of flame propagation. If flame propagates from the closed tube end, then the flame front accelerates with no limit until the detonation is triggered. The above results make a good advance in solving one of the most difficult problems of combustion theory, the problem of deflagration to detonation transition. We developed the analytical theory of accelerating flames and found good agreement with results of direct numerical simulations. Also we performed analytical and numerical studies of another mechanism of flame acceleration caused by initial conditions. The flame ignited at the axis of a tube acquires a “finger” shape and accelerates. Still, such acceleration takes place for a rather short time until the flame reaches the tube wall. In the case of flame propagating from the open tube end to the closed one the flame front oscillates and therefore generates acoustic waves. The acoustic waves reflected from the closed end distort the flame surface. When the frequency of acoustic mode between the flame front and the tube end comes in resonance with intrinsic flame oscillations the burning rate increases considerably and the flame front becomes violently corrugated.