On interface modeling  with emphasis on friction

Abstract: The general trend toward increased use of computer models and simulations during product development has led to a need for accurate and reliable product models. The function of many products relies on contact interfaces between interacting components. To simulate the behavior of such products, accurate models of both components and interfaces are required. Depending on the purpose of the simulation, interface models of different degrees of complexity are needed. In simulation of very large systems with many interfaces, it might be computationally expensive to integrate detailed models of each individual interface. Condensed models, or abstractions, that describe the interface properties with a minimum of degrees of freedom are therefore required.This thesis deals with mechanical interfaces with an emphasis on friction. In the four appended papers friction models are discussed in terms of condensed models, as well as in terms of more detailed contact models. The aim is to study how friction can be modeled in behavioral simulation of products and to discuss the convenience and relevance of using different types of friction models as building blocks of a system model in behavioral simulations.Paper A presents a review of existing condensed friction models for sliding contacts under different running conditions and discusses the models from both simulation and tribological points of view.In papers B and C a simplified contact model, called the elastic foundation model, is used to model friction in a boundary-lubricated rolling and sliding contact. The model is integrated in a dynamic rigid body model of a mechanical system, the system behavior is simulated, and the result is compared with experimental results.Paper D discusses the application of the elastic foundation model to rough surface contact problems and investigates how the error in the elastic foundation results depends on surface roughness.