Modeling framework for ageing of low alloy steel

Abstract: Ageing of low alloy steel in nuclear applications commonly takes the form as a hardening and an embrittlement of the material. This is due to the evolution of the microstructure during irradiation and at purely thermal conditions, as a combination or separate. Irradiation introduces evenly distributed solute clusters, while thermal ageing has been shown to yield a more inhomogeneous distribution. These clusters affect the dislocation motion within the material and results in a hardening and in more severe cases of ageing, also a decreased work hardening slope due to plastic strain localization into bands/channels. Embrittlement corresponds to decreased fracture toughness due to microstructural changes resulting from ageing. The thesis presents a possible framework for modeling of ageing effects in low alloy steels.In Paper I, a strain gradient plasticity framework is applied in order to capture length scale effects. The constitutive length scale is assumed to be related to the dislocation mean free path and the changes this undergoes during plastic deformation. Several evolution laws for the length scale were developed and implemented in a FEM-code considering 2D plane strain. This was used to solve a test problem of pure bending in order to investigate the effects of the length scale evolution. As all length scale evolution laws considered in this study results in a decreasing length scale; this leads to a loss of non-locality which causes an overall softening at cases where the strain gradient is dominating the solution. The results are in tentative agreement with phenomena of strain localization that is occurring in highly irradiated materials.In Paper II, the scalar stress measure for cleavage fracture is developed and generalized, here called the effective normal stress measure. This is used in a non-local weakest link model which is applied to two datasets from the literature in order to study the effects of the effective normal stress measure, as well as new experiments considering four-point bending of specimens containing a semi-elliptical surface crack. The model is shown to reproduce the failure probability of all considered datasets, i.e. well capable of transferring toughness information between different geometries.