A Vibro-Acoustic Study of Vehicle Suspension Systems Experimental and Mathematical Component Approaches

Abstract: The objective of the present work is to study the vehicle suspension as a vibro-acoustic system of high complexity, consisting of many sub-systems with fundamentally different acoustical properties. In a parallel numerical and experimental modelling effort, important contributions to the understanding of its behaviour have been achieved. These findings are based on a balance between component investigations and global modelling of the complete system; they have been formulated for the transmission of both tyre-road excitation and friction-induced vibrations in the brake system.Initially an experimental study was conducted on a full vehicle test rig studying the broadband interior brake noise problem of, here named, roughness noise. The purpose of the study was twofold: first, to determine if the transmission from the source to the interior of the vehicle was structure-borne; second, to study the complexity of the suspension as a vibro-acoustic system. Parameters a_ecting the vibro-acoustic source were varied to gain understanding of the source mechanisms. This experimental study laid the foundation of the first part of this thesis (paper A) and provided the directions for the second part, the development of a mathematical modelling approach (paper B and C). In these two papers, methods for analysing the complex vibro-acoustic transfer of structure-borne sound in a vehicle suspension system were developed. The last part was then focussed on the wheel rim influence on the vibro-acoustic behaviour (paper D) of the suspension system. As a whole, the work clearly demonstrates that it is possible to conduct component studies of subsystems in the vehicle suspension system; and from these component studies it is possible draw conclusions that very well may avoid severe degradations in the interior noise of future vehicle generations.