Thermally Expandable Microspheres Prepared via Suspension Polymerization - Synthesis, Characterization, and Application
Abstract: Thermally expandable microspheres are polymeric core/shell particles in which a volatile hydrocarbon is encapsulated by a thermoplastic shell. When these microspheres are heated, they expand and increase their volume dramatically. This volume increase is retained upon cooling, leading to a density reduction from around 1100 kg m-3 to about 30 kg m-3. Since the development in the early 1970´s, microspheres have been used extensively by the industry as a foaming agent or light weight filler.In this thesis, microspheres with a poly(acrylonitrile-co-methacrylonitrile) shell have been synthesized through free radical suspension polymerization. The microspheres have been characterized with respect to particle morphology and expansion properties in order to deepen the understanding of the microspheres.It was found that the monomer feed ratio and the polymerization temperature are very important parameters with respect to the expansion properties. Excellent expansion could only be accomplished when polymerizing at 62 °C, with the acrylonitrile feed, fAN, being around 60 mol%, even though core/shell microspheres are formed over a much wider range of fAN. Furthermore, no expansion was achieved when polymerizing at 80 °C, even though no noticeable differences were found, compared to the corresponding sample polymerized at 62 °C.It was also shown that the expansion properties can be modified by replacing the encapsulated hydrocarbon by another hydrocarbon with a different boiling point. Not only is the boiling point important, the structure of the hydrocarbon is also important. Isooctane which is highly branched was found to give superior expansion compared to linear or cyclic hydrocarbons having a similar boiling point.Crosslinking of the polymer shell has proven to be very important for the expansion properties. Both the amount and the structure of the crosslinker are important parameters. Especially the maximum expansion can be improved by the crosslinking of the polymer shell. This originates in an increase in the shape persistence of the expanded microspheres at elevated temperatures. By the combination of crosslinkers that are incorporated separately into the polymer shell, the onset temperature of expansion can be increased significantly.Finally, the surface of microspheres has been modified by grafting poly(glycidyl methacrylate) from the surface by ARGET ATRP. Given that the reaction conditions are appropriate, such modifications can be performed with only limited effects on the expansion properties of the microspheres.
This dissertation MIGHT be available in PDF-format. Check this page to see if it is available for download.