Search for dissertations about: "thesis related to mechanics"

Showing result 1 - 5 of 333 swedish dissertations containing the words thesis related to mechanics.

  2. 1. Fluid mechanics of fibre suspensions related to papermaking

    Author : Richard Holm; Gustav Amberg; R. Krekes; KTH; []
    Keywords : TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Applied mechanics; applied fluid mechanics; fibre suspensions; roll-forming; sedimentation; shear flow; Teknisk mekanik; Engineering mechanics; Teknisk mekanik;

    Abstract : This thesis deals with fluid dynamic mechanisms related to papermaking, specif- ically: the initial dewatering mechanisms during roll-forming and fibre motion in sedimentation and in shear flow. Pressure and wire position measurements have been conducted in a model resembling the forming zone and the measured pressure distributions are shown to have more complex patterns than the simple model p / T/R (where T is the wire tension and R is the roll radius). READ MORE

  4. 2. Flow measurements related to gas exchange applications

    Author : Fredrik Laurantzon; Henrik Alfredsson; Venkatesa Vasanta Ram; KTH; []
    Keywords : TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Flow meters; vortex flow meters; compressible flow; pulsating flow; hot-wire anemometry; cold-wire anemometry; time resolved measurements; wavelet analysis;

    Abstract : This thesis deals with flow measuring techniques applied to steady and pulsating gas flows relevant to gas exchange systems for internal combustion engines. Gas flows in such environments are complex, i.e. they are inhomogeneous, three-dimensional, unsteady, non-isothermal and exhibit significant density changes. READ MORE

  5. 3. Modeling of cast iron materials related to machining

    Author : Goran Ljustina; Chalmers tekniska högskola; []
    Keywords : TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Machining simulation; Microstructure; Fracture; Johnson Cook plasticity;

    Abstract : A microstructure level simulation model of cast iron machining based on micrograph image analysis has been developed. The simulation tool has been developed for theorthogonal machining process involving 2D representations of a range of cast iron microstructures. READ MORE

  6. 4. Numerical methods and multi-scale modeling for phase-field fracture - With applications in linear elastic and poro-elastic media

    Author : Ritukesh Bharali; Chalmers tekniska högskola; []
    Keywords : TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; NATURVETENSKAP; NATURAL SCIENCES; fracture; multiphysics; finite element; multiscale; desiccation; solvers; fracking; phase-field; solution techniques;

    Abstract : This thesis presents novel numerical methods and a multi-scale modelling framework tailored for advancing the phase-field fracture model with applications in linear elastic and poro-elastic media. In the realm of the numerical methods, the focus lies on devising computationally efficient and robust monolithic solution techniques. READ MORE

  7. 5. Coupled models related to manufacturing simulations

    Author : Magnus Söderberg; Mats Näsström; Luleå tekniska universitet; []
    Keywords : TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Material Mechanics; Materialmekanik;

    Abstract : Manufacturing simulations is today on a level where a manufacturingchain can be simulated including various steps such as machining, welding, metal deposition and heat treatment. This opens up for the possibility to investigate different manufacturing routes without the high costsof experimental work. READ MORE