Search for dissertations about: "Manganese oxide"

Showing result 1 - 5 of 53 swedish dissertations containing the words Manganese oxide.

  1. 1. Screening of oxygen-carrier particles based on iron-, manganese-, copper- and nickel oxides for use in chemical-looping technologies

    Author : Marcus Johansson; Chalmers University of Technology; []
    Keywords : Oxygen Carrier; Carbon Dioxide Capture; Chemical-Looping Combustion; Chemical-Looping Reforming; Nickel Oxide; Iron Oxide; Copper Oxide; Manganese Oxide;

    Abstract : Capture and storage of carbon dioxide from combustion will likely be used in the future as a method of reducing emissions of greenhouse gases and thus be part of the overall strategy to stabilize the atmospheric levels of CO2. Chemical-looping combustion is a method of combustion where CO2 is inherently separated from the non-condensable components in the flue gas without the need for an energy intensive air separation unit. READ MORE

  2. 2. Catalytic Incineration of CO and VOC Emissions over Supported Metal Oxide Catalysts

    Author : Per-Olof Larsson; Tillämpad biokemi; []
    Keywords : TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Titania; Ceria; Manganese oxide; Copper oxide; VOC; CO; Ethanol; Ethyl acetate; Metal oxide catalysts; Catalytic combustion; Catalytic incineration; Alumina.; Chemical technology and engineering; Kemiteknik och kemisk teknologi; Fysicumarkivet A:1999:Larsson;

    Abstract : Catalytic incineration is one of the methods to reduce the emissions of CO and VOCs. Low operation temperature and low catalyst cost are essential parameters for catalytic incinerators. Pt/Al2O3 catalysts are frequently used today, but the cheaper metal oxide catalysts can be very competitive if comparable overall activity is obtained. READ MORE

  3. 3. Manganese Combined Oxides as Oxygen Carriers for Chemical-Looping Combustion

    Author : Malin Hanning; Chalmers University of Technology; []
    Keywords : TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; carbon capture; combined oxide; manganese oxide; chemical-looping;

    Abstract : The global emissions of greenhouse gases are increasing and the development of mitigation measures is becoming more important. One of the alternatives proposed is carbon capture and storage, where the carbon dioxide emitted from large point sources is captured, compressed and stored in underground storage sites. READ MORE

  4. 4. Selection of oxygen carriers for chemical-looping combustion using methane as a fuel

    Author : Marcus Johansson; Chalmers University of Technology; []
    Keywords : TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Carbon Dioxide Capture; Nickel oxide; CO2 Separation; Oxygen Carrier; Iron oxide; Manganese oxide.; Chemical-Looping Combustion;

    Abstract : In order to meet new demands on clean energy producing technologies, chemical-looping combustion could play an important role. With this technique, CO2 from the flue gases can be separated and collected without excessive energy and efficiency penalty. This is because nitrogen from the combustion air is never mixed with the fuel. READ MORE

  5. 5. Microstructure and properties of welds in the lean duplex stainless steel LDX 2101

    Author : Elin M. Westin; John Ågren; Hannu Hänninen; KTH; []
    Keywords : ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Duplex stainless steel; welding; HAZ; nitrogen; manganese; microstructure; austenite formation; phase balance; precipitates; element distribution; segregation; depletion; solidification; pitting corrosion resistance; solidification; element loss; evaporation; deposition; weld oxide; thermo-mechanical simulation; thermodynamic modelling; EPMA; XPS; post-weld cleaning; pickling; Metallurgical process and manufacturing engineering; Metallurgisk process- och produktionsteknik;

    Abstract : Duplex stainless steels can be very attractive alternatives to austenitic grades due to their almost double strength at equal pitting corrosion resistance. When welding, the duplex alloys normally require addition of filler metal, while the commodity austenitic grades can often be welded autogenously. READ MORE